DS89C387_16 Datasheet, PDF (2/15 Pages) Texas Instruments – Twelve Channel CMOS Differential Line Driver

DS89C387
SNLS101E – MAY 1995 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings^(1)(2)(3)
Supply Voltage (V_CC)
DC Voltage (V_IN)
DC Output Voltage (V_OUT)
Clamp Diode Current (I_IK, I_OK)
DC Output Current, per pin (I_OUT)
DC V_CC or GND Current (I_CC)
Storage Temperature Range (T_STG)
Junction Temperature
Maximum Power Dissipation (P_D) @ 25°C⁽⁴⁾
SSOP Package
Thermal Resistance
θ_JA
θ_JC
Lead Temperature (T_L)
(Soldering 4 sec.)
This device does not meet 2000V ESD rating.⁽⁵⁾
−0.5 to 7.0V
−1.5 to V_CC +1.5V
−0.5 to 7V
±20 mA
±150 mA
±500 mA
−65°C to +150°C
+150°C
1359 mW
81.7°C/W
31.7°C/W
260°C
(1) Unless otherwise specified, all voltages are referenced to ground. All currents into device pins are positive; all currents out of device
pins are negative.
(2) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the device should be operated at these limits. The table of “Electrical Characteristics” provide conditions for actual device operation.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(4) Ratings apply to ambient temperature at 25°C. Above this temperature derate SSOP (MEA) Package 10.9 mW/°C.
(5) ESD Rating: HBM (1.5 kΩ, 100 pF) Inputs ≥ 1500V Outputs ≥ 1000V EIAJ (0Ω, 200 pF) All Pins ≥ 350V
Operating Conditions
Supply Voltage (V_CC)
DC Input or Output Voltage (V_IN, V_OUT)
Operating Temperature Range (T_A)
DS89C387T
Input Rise or Fall Times (t_r, t_f)
Min
Max
Units
4.50 5.50
V
0
V_CC
V
−40
+85
°C
500
ns
DC Electrical Characteristics⁽¹⁾⁽²⁾
V_CC = 5V ±10% (unless otherwise specified)
Parameter
V_IH
High Level Input
Voltage
V_IL
Low Level Input
Voltage
V_OH
High Level Output
Voltage
V_OL
Low Level Output
Voltage
Test Conditions
V_IN = V_IH or V_IL,
I_OUT = −20 mA
V_IN = V_IH or V_IL,
I_OUT = 48 mA
Min
Typ
Max
Units
2.0
V_CC
V
GND
0.8
V
2.5
3.4
V
0.3
0.5
V
(1) Unless otherwise specified, all voltages are referenced to ground. All currents into device pins are positive; all currents out of device
pins are negative.
(2) Unless otherwise specified, min/max limits apply across the −40°C to 85°C temperature range. All typicals are given for V_CC = 5V and
T_A = 25°C.
2
Submit Documentation Feedback
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: DS89C387