DS89C386_16 Datasheet, PDF (2/13 Pages) Texas Instruments – Twelve Channel CMOS Differential Line Receiver

DS89C386
SNLS100C – MAY 1995 – REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings^(1)(2)(3)
Supply Voltage (V_CC)
Input Common Mode Range (V_CM)
Differential Input Voltage (V_DIFF)
Enable Input Voltage (V_IN)
Storage Temperature Range (T_STG)
Lead Temperature (Soldering 4 sec)
Maximum Power Dissipation at 25°C⁽⁴⁾
SSOP Package
Current Per Output
This device does not meet 2000V ESD rating.⁽⁵⁾
−0.5 to 7V
±14V
±14V
7V
−65°C to +150°C
260°C
1359 mW
±25 mA
(1) Unless otherwise specified, all voltages are referenced to ground.
(2) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the device should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device
operation.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(4) Ratings apply to ambient temperature at 25°C. Above this temperature derate SSOP (MEA) Package 10.9 mW/°C.
(5) ESD Rating: HEM (1.5 kΩ, 100 pF) Inputs ≥ 2000V Outputs ≥ 1000V EIAJ (0Ω, 200 pF) All Pins ≥ 350V
Operating Conditions
Supply Voltage (V_CC)
Operating Temperature Range (T_A)
DS89C386T
Enable Input Rise or Fall Times
Min
Max
Unit
4.50
5.50
V
−40
+85
°C
500
ns
DC Electrical Characteristics⁽¹⁾
V_CC = 5V ±10% (unless otherwise specified)
Parameter
V_TH
Differential Input Voltage
V_HYST
R_IN
Input Hysteresis
Input Resistance
I_IN
Input Current
(Under Test)
V_OH
High Level Output Voltage
V_OL
Low Level Output Voltage
V_IH
Enable High Input Level Voltage
V_IL
Enable Low Input Level Voltage
I_OZ
TRI-STATE Output Leakage Current
I_I
Enable Input Current
I_CC
Quiescent Power Supply Current
Test Conditions
V_OUT = V_OH or V_OL
−7V < V_CM < +7V
V_CM = 0V
V_IN = −7V, +7V
(Other Input = GND)
V_IN = +10V, Other Input = GND
V_IN = −10V, Other Input = GND
V_CC = Min., V_(DIFF) = +1V
I_OUT = −6.0 mA
V_CC = Max., V_(DIFF) = −1V
I_OUT = 6.0 mA
V_OUT = V_CC or GND, EN = V_IL
V_IN = V_CC or GND
V_CC = Max., V_(DIFF) = +1V
Min
Typ
Max
Units
−200 ±35 +200
mV
70
mV
5.0
6.8
10
kΩ
+1.1 +1.5
mA
−2.0 −2.5
mA
3.8
4.2
V
0.2
0.3
V
2.0
GND
V_CC
V
0.8
V
±0.5 ±5.0
μA
±1.0
μA
48
69
mA
(1) Unless otherwise specified, Min/Max limits apply across the operating temperature range. All typicals are given for V_CC = 5V and T_A =
25°C.
2
Submit Documentation Feedback
Product Folder Links: DS89C386
Copyright © 1995–2013, Texas Instruments Incorporated