CD74FCT373_16 Datasheet, PDF (2/12 Pages) Texas Instruments – BiCMOS OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS

CD74FCT373
BiCMOS OCTAL TRANSPARENT D-TYPE LATCH
WITH 3-STATE OUTPUTS
SCBS738 – JULY 2000
logic symbol^†
1
OE
EN
11
LE
C1
3
1D
1D
4
2D
7
3D
8
4D
13
5D
14
6D
17
7D
18
8D
2
1Q
5
2Q
6
3Q
9
4Q
12
5Q
15
6Q
16
7Q
19
8Q
† _{This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.}
logic diagram (positive logic)
OE ¹
LE ¹¹
C1
3
1D
1D
2
1Q
To Seven Other Channels
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)^‡
DC supply voltage range, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 6 V
DC input diode current, I_IK (V_I < –0.5 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20 mA
DC output diode current, I_OK (V_O < –0.5 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 mA
DC output sink current per output pin, I_OL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 mA
DC output source current per output pin, I_OH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30 mA
Continuous current through V_CC, I_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 mA
Continuous current through GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 mA
Package thermal impedance, θ_JA (see Note 1): E package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W
M package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W
SM package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
‡ _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The package thermal impedance is calculated in accordance with JESD 51.
2
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265