TMS320F28027_16 Datasheet, PDF (16/138 Pages) Texas Instruments – Piccolo Microcontrollers

TMS320F28027, TMS320F28026, TMS320F28023, TMS320F28022
TMS320F28021, TMS320F28020, TMS320F280200
SPRS523K – NOVEMBER 2008 – REVISED JUNE 2016
www.ti.com
5 Specifications
5.1 Absolute Maximum Ratings⁽¹⁾⁽²⁾
over operating free-air temperature range (unless otherwise noted)
MIN
MAX UNIT
Supply voltage
Analog voltage
Input voltage
Output voltage
Input clamp current
Output clamp current
Junction temperature⁽⁴⁾
Storage temperature⁽⁴⁾
V_DDIO (I/O and Flash) with respect to V_SS
V_DD with respect to V_SS
V_DDA with respect to V_SSA
V_IN (3.3 V)
V_IN (X1)
V_O
I_IK (V_IN < 0 or V_IN > V_DDIO) ⁽³⁾
I_OK (V_O < 0 or V_O > V_DDIO)
T_J
T_stg
–0.3
4.6
V
–0.3
2.5
–0.3
4.6
V
–0.3
4.6
V
–0.3
2.5
–0.3
4.6
V
–20
20
mA
–20
20
mA
–40
150
°C
–65
150
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Section 5.3 is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to V_SS, unless otherwise noted.
(3) Continuous clamp current per pin is ±2 mA.
(4) Long-term high-temperature storage or extended use at maximum temperature conditions may result in a reduction of overall device life.
For additional information, see Semiconductor and IC Package Thermal Metrics.
5.2 ESD Ratings
TMS320F2802x and TMS320F2802xF in 48-pin PT package
Human body model (HBM), per AEC Q100-002⁽¹⁾
V_(ESD)
Electrostatic
discharge
Charged device model (CDM), per AEC Q100-011
TMS320F2802x and TMS320F2802xF in 38-pin DA package
Human body model (HBM), per AEC Q100-002⁽¹⁾
V_(ESD)
Electrostatic
discharge
Charged device model (CDM), per AEC Q100-011
VALUE
All pins
All pins except corner
pins
Corner pins on 48-pin PT:
1, 12, 13, 24, 25, 36, 37,
48
±2000
±500
±750
All pins
All pins except corner
pins
Corner pins on 38-pin DA:
1, 19, 20, 38
±2000
±500
±750
(1) AEC Q100-002 indicates HBM stressing is done in accordance with the ANSI/ESDA/JEDEC JS-001 specification.
UNIT
V
V
16
Specifications
Copyright © 2008–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320F28027 TMS320F28026 TMS320F28023 TMS320F28022 TMS320F28021
TMS320F28020 TMS320F280200