DRV3203E-Q1 Datasheet, PDF (14/39 Pages) Texas Instruments – Three-Phase Brushless Motor Driver

DRV3203E-Q1
SLVSCE5A – NOVEMBER 2013 – REVISED JANUARY 2014
FLGFLT1 (address 0x09): Fault Flag Register 1
Bit
Name
Type ⁽¹⁾
Reset Description
7:1 RSVD R
0
VBUV RW
0000
000
1
Reserved
Fault flag bit of thermal shutdown condition.⁽²⁾
If FLTCFG.FLGLATCH_EN = 1
0: Read = No fault condition exists since last cleared.
Write = No effect
1: Read = Fault condition exists.
Write = Clear the flag
If FLTCFG.FLGLATCH_EN = 0
0: Read = No fault condition
Write = No effect
1: Read = Fault condition
Write = No effect
(1) R: Read, W: Write
(2) Assertion of the fault flags may occur during power up.
CS
SCK
Fault Event
SPI Read Buffer
Status N
Status N+1
Status N
Status N+1
SPI DOUT
FLTFLG*
Status N
Serial Output Format
FLTFLG*
Status N+1
Serial Output Format
Figure 8. SPI Data-Out Timing Chart of Fault Flag Registers
www.ti.com
14
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: DRV3203E-Q1