English
Language : 

TLC59210 Datasheet, PDF (13/22 Pages) Texas Instruments – 8-BIT DMOS SINK DRIVER WITH LATCH
www.ti.com
TLC59210
SCLS711A – MARCH 2009 – REVISED NOVEMBER 2015
10 Power Supply Recommendations
TLC59210 operates from a VCC range of 3 V to 5.5 V. The system will also require a power supply for the LEDs.
The supply voltage of the LEDs must be greater than the forward voltage of the LED plus the VOL of the
channel, but not greater than 30V.
11 Layout
11.1 Layout Guidelines
The traces carrying power through the LEDs should be wide enough to handle the necessary current. All LED
current passes through the device and into the ground node. There must be a strong connection between the
device ground and the circuit board ground.
11.2 Layout Example
To µC To µC To µC To µC To µC To µC To µC To µC To µC To µC
CLK D8
D7
D6
D5
D4
D3
D2
D1 CLR
GND Y8
Y7
Y6
Y5
Y4
Y3
Y2
Y1
VCC
To Device
Power Suply
Via to GND
Figure 11. Layout Example
To LED
Power Supply
Copyright © 2009–2015, Texas Instruments Incorporated
Product Folder Links: TLC59210
Submit Documentation Feedback
13