OPA354AIDBVRG4 Datasheet, PDF (13/32 Pages) Texas Instruments – 250MHz, Rail-to-Rail I/O, CMOS OPERATIONAL AMPLIFIERS

www.ti.com
The OPA354 can be used as an amplifier for RGB graphic
signals, which have a voltage of zero at the video black
level, by offsetting and AC-coupling the signal. See
Figure 5.
DRIVING ANALOG-TO-DIGITAL
CONVERTERS
The OPA354 series op amps offer 60ns of settling time to
0.01%, making them a good choice for driving high- and
medium-speed sampling A/D converters and reference
OPA354
OPA2354
OPA4354
SBOS233E − MARCH 2002− REVISED MAY 2009
circuits. The OPA354 series provide an effective means of
buffering the A/D converter’s input capacitance and
resulting charge injection while providing signal gain. For
applications requiring high DC accuracy, the OPA350
series is recommended.
Figure 6 illustrates the OPA354 driving an A/D converter.
With the OPA354 in an inverting configuration, a capacitor
across the feedback resistor can be used to filter
high-frequency noise in the signal.
V+
Red⁽¹⁾
R₁
R₂
V+
Green⁽¹⁾
R₁
R₂
604Ω
+3V
+
1µF 10nF
604Ω
1/2
OPA2354
604Ω
1/2
OPA2354
75Ω
75Ω
NOTE: (1) Source video signal offset
300mV above ground to accomodate
op amp swing−to−ground capability.
V+
Blue⁽¹⁾
R₁
R₂
604Ω
604Ω
604Ω
+3V
+
1µF 10nF
75Ω
OPA354
Red
75Ω
Green
75Ω
Blue
75Ω
Figure 5. RGB Cable Driver
13