OPA170-EP Datasheet, PDF (13/20 Pages) Texas Instruments – 36-V, SINGLE-SUPPLY, LOW-POWER OPERATIONAL AMPLIFIER

www.ti.com
If there is an uncertainty about the ability of the
supply to absorb this current, external zener diodes
may be added to the supply pins. The zener voltage
must be selected such that the diode does not turn
on during normal operation. However, its zener
voltage should be low enough so that the zener diode
conducts if the supply pin begins to rise above the
safe operating supply voltage level.
OPA170-EP
SBOS598A – DECEMBER 2012 – REVISED DECEMBER 2012
Copyright © 2012, Texas Instruments Incorporated
Product Folder Links: OPA170-EP
Submit Documentation Feedback
13