LM3S9G97_15 Datasheet, PDF (1273/1341 Pages) Texas Instruments – Stellaris LM3S9G97 Microcontroller

Stellaris^® LM3S9G97 Microcontroller
Table 26-44. Nominal Power Consumption (continued)
Parameter Parameter Name
Conditions
Nom
Unit
I_{DD_SLEEP} Sleep mode
V_DD = 3.3 V
Peripherals = All clock gated
20
mA
System Clock = 80 MHz (with PLL)
Temp = 25°C
I_{DD_DEEPSLEEP} Deep-sleep mode
Peripherals = All OFF
System Clock = IOSC30KHZ/64
Temp = 25°C
550
µA
I_{HIB_NORTC}
Hibernate mode (external wake, V_BAT = 3.0 V
RTC disabled, I/O not
powered^c)
V_DD = 0 V
V_DDA = 0 V
Peripherals = All OFF
30
µA
System Clock = OFF
Hibernate Module = 0 kHz
I_{HIB_RTC}
Hibernate mode (RTC enabled,
I/O not powered^c)
V_BAT = 3.0 V
V_DD = 0 V
V_DDA = 0 V
Peripherals = All OFF
44
µA
System Clock = OFF
Hibernate Module = 32 kHz
a. Ethernet MAC and PHY powered down by software.
b. Auto-negotiate enabled. If an Ethernet cable is attached to the connector, the consumption increases by 7-10 mA.
c. The VDD3ON mode must be disabled for the I/O ring to be unpowered.
26.20.2
Maximum Current Consumption
The current measurements specified in the table that follows are maximum values under the following
conditions:
■ V_DD = 3.6 V
■ V_DDC = 1.3 V
■ V_BAT = 3.25 V
■ V_DDA = 3.6 V
■ Temperature = 25°C
■ Clock source (MOSC) = 16.348-MHz crystal oscillator
Table 26-45. Detailed Current Specifications
Parameter
I_{DD_RUN}
Parameter Name
Conditions
Run mode 1 (Flash loop) V_DD = 3.6 V
Code= while(1){} executed out of Flash
Peripherals = All ON
System Clock = 80 MHz (with PLL)
Temperature = 85°C
Max
210^a
138^b
Unit
mA
July 03, 2014
Texas Instruments-Production Data
1273