PTD08D210W Datasheet, PDF (12/19 Pages) Texas Instruments – DUAL 10-A OUTPUTS, 4.75-V to 14-V INPUT, NON-ISOLATED, DIGITAL POWERTRAIN™ MODULE

PTD08D210W
SLTS295B – DECEMBER 2009 – REVISED DECEMBER 2010
www.ti.com
UCD9240 Graphical User Interface (GUI)
When using the UCD92x0 digital controller along with digital PowerTrain modules to design a digital power
system, several internal parameters of the modules are required to run the Fusion Digital Power Designer GUI.
See the plant parameters below for the PTD08D210W digital PowerTrain modules.
L (µH)
0.47
Table 1. PTD08D210W Plant Parameters
PTD08D210W Plant Parameters
DCR (mΩ)
2.6
R_DS(on)-high (mΩ)
15.5
R_DS(on)-low (mΩ)
6.5
Internal output capacitance is present on the digital PowerTrain modules themselves. When using the GUI
interface this capacitance information must be included along with any additional external capacitance. See the
capacitor parameters below for the PTD08D210W digital PowerTrain modules.
C (µF)
47
Table 2. PTD08D210W Capacitor Parameters
PTD08D210W Capacitor Parameters
ESR (mΩ)
ESL (nH)
1.5
2.5
Quantity
1
12
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): PTD08D210W