LP38511TJ-ADJ Datasheet, PDF (12/21 Pages) Texas Instruments – LP38511-ADJ 800mA Fast-Transient Response Adjustable Low-Dropout Linear Voltage Regulator

LP38511-ADJ
SNVS545D – JANUARY 2009 – REVISED APRIL 2013
www.ti.com
Figure 21. θ_JA vs Thermal Via Count for the PFM Package on 4–Layer PCB
Figure 22 shows the thermal performance when the PFM is mounted to a two layer PCB where the copper area
is predominately directly under the exposed DAP. As shown in the figure, increasing the copper area beyond 1
square inch produces very little improvement.
Figure 22. θ_JA vs Copper Area for the PFM Package
Heat-Sinking The SO PowerPad Package
The DAP of the SO PowerPad package is soldered to the copper plane for heat sinking. The LP38511MR
package has a θ_JA rating of 168°C/W, and a θ_JC rating of 11°C/W. The θ_JA rating of 168°C/W includes the device
DAP soldered to an area of 0.008 square inches (0.09 in x 0.09 in) of 1 ounce copper on a two sided PCB, with
no airflow. See JEDEC standard EIA/JESD51-3 for more information.
Figure 23 shows a curve for different thermal via counts under the exposed DAP, using a four layer PCB for heat
sinking. The thermal vias connect the copper area directly under the exposed DAP to the first internal copper
plane only. See JEDEC standards EIA/JESD51-5 and EIA/JESD51-7 for more information.
12
Submit Documentation Feedback
Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: LP38511-ADJ