English
Language : 

AMC1200BDUBR Datasheet, PDF (11/24 Pages) Texas Instruments – Fully-Differential Isolation Amplifier
AMC1200
AMC1200B
www.ti.com
THEORY OF OPERATION
SBAS542B – APRIL 2011 – REVISED AUGUST 2012
INTRODUCTION
The differential analog input of the AMC1200 and AMC1200B is a switched-capacitor circuit based on a second-
order modulator stage that digitizes the input signal into a 1-bit output stream. These devices compare the
differential input signal (VIN = VINP – VINN) against the internal reference of 2.5 V using internal capacitors that
are continuously charged and discharged with a typical frequency of 10 MHz. With the S1 switches closed, CIND
charges to the voltage difference across VINP and VINN. For the discharge phase, both S1 switches open first
and then both S2 switches close. CIND discharges to approximately AGND + 0.8V during this phase. Figure 31
shows the simplified equivalent input circuitry.
VDD1
GND1
GND1
VINP
VINN
CINP = 3pF
400W
S1
S1 400W
S2
CIND = 3.6pF
S2
CINN = 3pF
AGND + 0.8V
Equivalent
Circuit
VINP
AGND + 0.8V
VINN
3pF
RIN = 28kW
3pF
GND1
GND1
RIN
=
fCLK
1
· CDIFF
(fCLK = 10MHz)
Figure 31. Equivalent Input Circuit
GND1
The analog input range is tailored to directly accommodate a voltage drop across a shunt resistor used for
current sensing. However, there are two restrictions on the analog input signals, VINP and VINN. If the input
voltage exceeds the range AGND – 0.5 V to AVDD + 0.5 V, the input current must be limited to 10 mA to prevent
the implemented input protection diodes from damage. In addition, the linearity and the noise performance of the
device are ensured only when the differential analog input voltage remains within ±250 mV.
The isolated digital bit stream is processed by a third-order analog filter on the low-side and presented as a
differential output of the device.
The SiO2-based capacitive isolation barrier supports a high level of magnetic field immunity, as described in
application report SLLA181, ISO72x Digital Isolator Magnetic-Field Immunity (available for download at
www.ti.com).
Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Links: AMC1200 AMC1200B
Submit Documentation Feedback
11