LM3S5T36 Datasheet, PDF (1001/1050 Pages) Texas Instruments – Stellaris® LM3S5T36 Microcontroller

Stellaris^® LM3S5T36 Microcontroller
Figure 24-17. I²C Timing
I2
I6
I5
I2CSCL
I1
I4
I7
I8 I3
I9
I2CSDA
24.16
24.17
Universal Serial Bus (USB) Controller
The Stellaris^® USB controller electrical specifications are compliant with the Universal Serial Bus
Specification Rev. 2.0 (full-speed and low-speed support). Some components of the USB system
are integrated within the LM3S5T36 microcontroller and specific to the Stellaris microcontroller
design. An external component resistor is needed as specified in Table 24-27.
Table 24-27. USB Controller Characteristics
Parameter
Parameter Name
Value
Unit
R_UBIAS
Value of the pull-down resistor on the USB0RBIAS pin
9.1K ± 1 %
Ω
Analog Comparator
Table 24-28. Analog Comparator Characteristics
Parameter Parameter Name
Min
V_INP,V_INN
Input voltage range
GND
V_CM
Input common mode voltage range
GND
V_OS
Input offset voltage
-
C_MRR
Common mode rejection ratio
50
T_RT
Response time
-
T_MC
Comparator mode change to Output Valid
-
Nom
-
-
±10
-
-
-
Max
V_DD
V_DD-1.5
±25
-
1.0
10
Unit
V
V
mV
dB
µs
µs
Table 24-29. Analog Comparator Voltage Reference Characteristics
Parameter
R_HR
R_LR
A_HR
A_LR
Parameter Name
Resolution in high range
Resolution in low range
Absolute accuracy high range
Absolute accuracy low range
Min
Nom
-
V_DDA/31
-
V_DDA/23
-
-
-
-
Max
-
-
±R_HR/2
±R_LR/4
Unit
V
V
V
V
24.18
24.18.1
Current Consumption
This section provides information on typical and maximum power consumption under various
conditions. Unless otherwise indicated, current consumption numbers include use of the on-chip
LDO regulator and therefore include I_DDC.
Nominal Power Consumption
The following table provides nominal figures for current consumption.
January 21, 2012
Texas Instruments-Production Data
1001