English
Language : 

BQ2947_17 Datasheet, PDF (10/27 Pages) Texas Instruments – Overvoltage Protection for 2-Series to 4-Series Cell Li-Ion Batteries with External Delay Capacitor
bq2947
SLUSB15F – SEPTEMBER 2012 – REVISED JANUARY 2017
www.ti.com
Feature Description (continued)
For an NCH Open Drain Active Low configuration, the OUT pin pulls down to VSS when active (OV present) and
is high impedance when inactive (no OV).
VOV
VOV –VHYS
OUT (V)
tCD
Figure 8. Timing for Overvoltage Sensing (OUT Pin Is Active High)
Figure 9 shows the behavior of CD pin during an OV sequence.
Fault condition
present
VCD
V(CD)
Fault response
becomes active
VOUT1
V (OUT)
tCHGDELAY
tCD
Note: Active High OUT version shown
Figure 9. CD Pin Mechanism (OUT Pin Is Active High)
NOTE
In the case of an Open Drain Active Low version, the VOUT signal will be high and
transition to low state when the voltage on the VCD capacitor discharges to the set level
based on the tCD timer.
10
Submit Documentation Feedback
Product Folder Links: bq2947
Copyright © 2012–2017, Texas Instruments Incorporated