UCC5310 Datasheet, PDF (1/46 Pages) Texas Instruments – 4.3-A, 3-kVRMS Isolated Single-Channel Gate Drivers

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
UCC5310, UCC5320
SLLSER8A – JUNE 2017 – REVISED JUNE 2017
UCC53x0 4.3-A, 3-kV_RMS Isolated Single-Channel Gate Drivers
1 Features
•1 Isolated Single-Channel Gate Driver With Peak
Current up to 4.3 A
• 3-V to 15-V Input Supply Voltage
• 13.2-V to 33-V Output Driver Supply Voltage
• Feature Options
– Split Outputs (UCC5320S)
– UVLO With Respect to IGBT Emitter
(UCC5320E)
– Miller Clamp Option (UCC5310M)
• CMOS Inputs
• Negative Voltage Handling Capability on Input
Pins
• 75-ns (Maximum) Propagation Delay
• 100-kV/μs Minimum Common-Mode Transient
Immunity (CMTI)
• 4-kV ESD on All Pins
• Operating Temperature: –55°C to +125°C
Ambient
• Isolation Surge Withstand Voltage: 4242 V_PK
• 8-pin Narrow Body SOIC Package
• Safety-Related Certifications:
– 4242-V_PK Isolation per DIN V VDE V 0884-10
and DIN EN 61010-1 (Planned)
– 3000-V_RMS Isolation for 1 Minute per UL 1577
(Planned)
– CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 End Equipment
Standards (Planned)
– CQC Certification per GB4943.1-2011
(Planned)
2 Applications
• Industrial Motor-Control Drives
• Industrial Power Supplies
• Solar Inverters
• HEV and EV Power Modules
• Induction Heating
3 Description
The UCC53x0 is a family of compact, single-channel,
isolated IGBT, SiC, and MOSFET gate drivers with
superior isolation ratings and variants for pinout
configuration and drive strength.
The UCC53x0 is available in an 8-pin SOIC (D)
package. This package has a creepage and
clearance of 4 mm and can support isolation voltage
up to 3 kV_RMS, which is good for applications where
basic isolation is needed. With these various options
and wide power range, the UCC53x0 family is a good
fit for motor drives and industrial power supplies.
The UCC53x0S option provides a split output that
can be used to control the rise and fall times of the
driver. The UCC53x0M option connects the gate of
the transistor to an internal clamp to prevent false
turnon caused by Miller current. The UCC53x0E
option has its UVLO2 referenced to GND2, which
facilitates bipolar supplies.
Unlike an optocoupler, the UCC53x0 family has lower
part-to-part skew, lower propagation delay, higher
operating temperature, and higher CMTI.
Device Information⁽¹⁾
PART NUMBER PACKAGE
BODY SIZE (NOM)
UCC5310
UCC5320
D (8)
4.90 mm × 3.91 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Functional Block Diagram (S Version)
5 V _VCC1
VCC2 ^{15 V}
VCC2
UVLO,
IN+
UVLO
and
Level
Shift
Input
texatnd
Logic
Control
Logic
IN±
VOUTH
VOUTL
Rest of
Circuit
GND1
VEE2
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.