English
Language : 

TUSB214 Datasheet, PDF (1/23 Pages) Texas Instruments – USB 2.0 High Speed Signal Conditioner with BC1.2 CDP
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TUSB214
SLLSEX7 – AUGUST 2017
TUSB214 USB 2.0 High Speed Signal Conditioner with BC1.2 CDP
1 Features
•1 Compatible with USB 2.0, OTG 2.0 and BC 1.2
• Pin strap or I2C configurable
• BC1.2 Charging Downstream Port (CDP)
controller
• Support for LS, FS, HS signaling
• Ultra-low USB Disconnect and Shutdown Power
Consumption
• Selectable Signal Gain Via Daisy Chain Device for
High Loss Applications
• D1P/M and D2P/M Interchangeable and
Host/Device Agnostic
• Supports up to 5m pre-channel or 2m post-
channel Cable Length
– Four Selectable AC Boost Settings Via
External Pulldown Resistor
– DC Boost Along With AC Boost for Best Signal
Integrity
2 Applications
• Notebooks
• Desktops
• Docking Stations
• Tablets
• Cell Phones
• Active Cable, Cable Extenders
• Backplane
• Televisions
3 Description
The TUSB214 is a USB High-Speed (HS) signal
conditioner, designed to compensate for ISI signal
loss in a transmission channel.
TUSB214 has a patent-pending design which is
agnostic to USB Low Speed (LS) and Full Speed
(FS) signals. LS and FS signal characteristics are
unaffected by the TUSB214 while HS signals are
compensated.
Programmable signal AC boost and DC boost permits
fine tuning device performance to optimize High
Speed signals at the connector. This helps to pass
USB High Speed electrical compliance tests.
In addition, TUSB214 is compatible with the USB On-
The-Go (OTG) and Battery Charging (BC) protocols.
The TUSB214 provides BC1.2 Charging Downstream
Port (CDP) controller for applications in which USB
host or hub do not have this support.
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TUSB214
TUSB214I
X2QFN (12)
1.60 mm x 1.60 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
3.3 V
VCC
USB
Host
Cable
D2
D1
USB
Connector
GND
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.