TUSB1210-Q1 Datasheet, PDF (1/66 Pages) Texas Instruments – TUSB1210-Q1 Standalone USB Transceiver Chip Silicon

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TUSB1210-Q1
SLLSEL4A – SEPTEMBER 2014 – REVISED OCTOBER 2014
TUSB1210-Q1 Standalone USB Transceiver Chip Silicon
1 Features
•1 AEC-Q100 Qualified with:
– Temperature Grade 3: –40°C to 85°C
– HBM ESD Classification 1C
– CDM ESD Classification C4B
• USB2.0 PHY Transceiver Chip, Designed to
Interface with a USB Controller via a ULPI 12-pin
Interface, Fully Compliant With:
– Universal Serial Bus Specification Rev. 2.0
– On-The-Go Supplement to the USB 2.0
Specification Rev. 1.3
– UTMI+ Low Pin Interface (ULPI) Specification
Rev. 1.1
• DP/DM Line External Component Compensation
(Patent #US7965100 B1)
• Interfaces to Host, Peripheral and OTG Device
Cores; Optimized for Portable Devices or System
ASICs with Built-in USB OTG Device Core
• Complete USB OTG Physical Front-End that
Supports Host Negotiation Protocol (HNP) and
Session Request Protocol (SRP)
• ULPI Interface:
– I/O Interface (1.8 V) Optimized for Non-
Terminated 50 Ω Line Impedance
– ULPI CLOCK Pin (60 MHz) Supports Both
Input and Output Clock Configurations
– Fully Programmable ULPI-Compliant Register
Set
• Available in a 32-Pin Quad Flat No Lead
[QFN (RHB)] Package
3 Description
The TUSB1210-Q1 is a USB2.0 transceiver chip,
designed to interface with a USB controller via a ULPI
interface. It supports all USB2.0 data rates (High-
Speed 480 Mbps, Full-Speed 12 Mbps and Low-
Speed 1.5 Mbps), and is compliant to both Host and
Peripheral modes. It additionally supports a UART
mode and legacy ULPI serial modes.
TUSB1210-Q1 also supports the OTG (Ver1.3)
optional addendum to the USB 2.0 Specification,
including Host Negotiation Protocol (HNP) and
Session Request Protocol (SRP).
The DP/DM external component compensation in the
transmitter compensates for variations in the series
impendence in order to match with the data line
impedance and the receiver input impedance, to limit
data reflections, and thereby, improve eye diagrams.
Device Information⁽¹⁾
PART NUMBER PACKAGE
BODY SIZE (NOM)
TUSB1210-Q1
VQFN (32)
5.00 mm x 5.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Diagram
2 Applications
• Mobile Phones
• Tablet Devices
• Desktop Computers
• Portable Computers
• Video Game Consoles
• Portable Music Players
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.