TSC2100_16 Datasheet, PDF (1/77 Pages) Texas Instruments – PROGRAMMABLE TOUCH SCREEN CONTROLLER WITH INTEGRATED

www.ti.com
TSC2100
SLAS378− NOVEMBER 2003
PROGRAMMABLE TOUCH SCREEN CONTROLLER WITH INTEGRATED
STEREO AUDIO CODEC AND HEADPHONE/SPEAKER AMPLIFIER
FEATURES
D Integrated Touch Screen Processor With
Fully Automated Modes of Operation
D Programmable Converter Resolution, Speed,
and Averaging
D Programmable Autonomous Timing Control
D Direct Battery Measurement Accepts up to
6-V Input
D On-Chip Temperature Measurement
D Stereo Audio DAC and Mono Audio ADC
Support Rates up to 48 ksps
D High Quality 97-dB Stereo Audio
D Integrated PLL for Flexible Audio Clock
Generation
D Programmable Digital Audio
Bass/Treble/EQ/De-Emphasis
D On-Chip 325-mW, 8-W Speaker Driver
D Stereo Headphone Amplifier With Capless
Output Option
D Microphone Preamp and Hardware Automatic
Gain Control
D SPI™ and I²S™ Serial Interface
D Full Power-Down Control
D Low Power: 11-mW Stereo Audio Playback At
48 ksps
D 32-Pin TSSOP and 32-Pin 5y5 mm QFN
Package
APPLICATIONS
D Personal Digital Assistants
D Smart Cellular Phones
D MP3 Players
DESCRIPTION
The TSC2100 is a highly integrated touch screen
controller with on-chip processor and audio codec. The
touch screen portion of the TSC2100 contains a 12-bit
4-wire resistive touch screen ADC complete with drivers,
and interfaces to the host controller through a standard
SPI™ serial interface. The on-chip processor provides
extensive features specifically designed to reduce host
processor and bus overhead, with capabilities that include
fully automated operating modes, programmable
conversion resolution up to 12 bits, programmable
sampling rates up to 125 kHz, programmable conversion
averaging, and programmable on-chip timing generation.
The TSC2100 includes a high-performance audio codec
with 16/20/24/32-bit 97-dB stereo playback, mono record
functionality at up to 48 ksps. A microphone input includes
built-in preamp and hardware automatic gain control, with
single-ended or fully-differential input capability. The dual
output drivers on the TSC2100 can be programmed for low
or high power drive for optimized power saving capability.
The drivers can function as a stereo line-level output, a
stereo headphone amplifier with capless or ac-coupled
configurations, or a bridge-terminated speaker driver,
delivering up to 325 mW into an 8-Ω load. A programmable
digital audio effects processor enables bass, treble,
midrange, or equalization playback processing. The digital
audio data format is programmable to work with popular
audio standard protocols (I²S, DSP, Left/Right Justified) in
master or slave mode, and also includes an on-chip
programmable PLL for flexible clock generation capability.
Highly configurable software power control is provided,
enabling stereo audio playback at 48 ksps at 11 mW with
a 3.3-V analog supply level.
The TSC2100 offers a 12-bit measurement ADC and
internal reference voltage, as well as two battery
measurement inputs capable of reading battery voltages
up to 6 V, while operating at an analog supply as low as
2.7 V. It includes an on-chip temperature sensor capable
of reading 0.3°C resolution. The TSC2100 is available in
a 32 lead TSSOP and a 32 lead QFN.
US Patent No. 624639
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
SPI is a trademark of Motorola.
I²S is a trademark of Phillips Electronics.
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright © 2003, Texas Instruments Incorporated