TPL5010-Q1 Datasheet, PDF (1/22 Pages) Texas Instruments – AEC-Q100 Nano-Power System Timer with Watchdog Function

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPL5010-Q1
SNAS679 – SEPTEMBER 2016
TPL5010-Q1 AEC-Q100 Nano-Power System Timer with Watchdog Function
1 Features
•1 Qualified for Automotive Applications
• AEC-Q100 Qualified with the Following Results:
– Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C5
• Current Consumption of 35 nA (typ) at 2.5 V
• Supply Voltage from 1.8 V to 5.5 V
• Selectable Time Intervals 100 ms to 7200 s
• Timer Accuracy 1% (Typical)
• Resistor Selectable Time Interval
• Watchdog Functionality
• Manual Reset
• TPL5x10Q Family of AEC-Q100 Nano-Power
System Timers
• TPL5010-Q1 - Supply Current 35 nA
– Low Power Timer
– Watchdog Function
– Programmable Delay Range
– Manual Reset
• TPL5110-Q1 - Supply Current 35 nA
– Low Power Timer
– MOS-Driver
– Programmable Delay Range
– Manual Reset
– One-Shot Feature
2 Applications
• Electric Vehicles
• Always On Systems
• Battery powered systems
• Clutch Actuator circuit
• Car Door Handle circuit
• Smart Key
• Remote current sensor
• Intruder Detection
3 Description
The TPL5010-Q1 Nano Timer is a low power, AEC-
Q100 qualified timer with a watchdog feature ideal for
system wake up in duty cycled or battery powered
applications. In such systems the microcontroller
timer can be used for system wake-up, but if the
timer sleep current is high, up to 60-80% of the total
system current can be consumed by the
microcontroller timer in this sleep mode. Consuming
only 35 nA, the TPL5010-Q1 can replace the
functionality of the integrated microcontroller timer
and allow the microcontroller to be placed in a much
lower power mode. Such power savings extend the
operating life of batteries and enable the use of
significantly smaller batteries making the TPL5010-
Q1 ideal for power sensitive applications.. The
TPL5010-Q1 provides selectable timing intervals from
100 ms to 7200 s and is designed for interrupt-driven
applications. Some standards (such as EN50271)
require implementation of a watchdog for safety and
the TPL5010-Q1 realizes this watchdog function at
almost no additional power consumption. The
TPL5010-Q1 is available in a 6-pin SOT23 package.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPL5010-Q1
SOT23 (6)
3.00 mm x 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Application
Battery
VOUT
VIN
POWER MANAGEMENT
GND
REXT
TPL5010-Q1
VDD
GND
DELAY/
M_RST
RSTn
WAKE
DONE
µC
Rp
VDD
RSTn
GPIO
GPIO
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.