TLC374_15 Datasheet, PDF (1/26 Pages) Texas Instruments – LinCMOS QUADRUPLE DIFFERENTIAL COMPARATORS

TLC374, TLC374Q, TLC374Y
LinCMOS QUADRUPLE DIFFERENTIAL COMPARATORS
D Single- or Dual-Supply Operation
D Wide Range of Supply Voltages
2 V to 18 V
D Very Low Supply Current Drain 0.3 mA Typ
at 5 V
D Fast Response Time . . . 200 ns Typ for
TTL-Level Input Step
D Built-In ESD Protection
D High Input Impedance . . . 10¹² Ω Typ
D Extremely Low Input Bias Current 5 pA Typ
D Ultrastable Low Input Offset Voltage
D Input Offset Voltage Change at Worst-Case
Input Conditions Typically 0.23 µV/Month,
Including the First 30 Days
D Common-Mode Input Voltage Range
Includes Ground
D Outputs Compatible With TTL, MOS, and
CMOS
D Pin-Compatible With LM339
description
SLCS118C – NOVEMBER 1983 – REVISED MARCH 1999
D, J, N, OR PW PACKAGE
(TOP VIEW)
1OUT ₁
2OUT 2
V_DD 3
2IN – 4
2IN + 5
1IN – 6
1IN + 7
14 3OUT
13 4OUT
12 GND
11 4IN +
10 4IN –
9 3IN +
8 3IN –
FK PACKAGE
(TOP VIEW)
V_DD
NC
2IN –
NC
2IN +
3 2 1 20 19
4
18
5
17
6
16
7
15
8
14
9 10 11 12 13
GND
NC
4IN +
NC
4IN –
These quadruple differential comparators are
fabricated using LinCMOS technology and
consist of four independent voltage comparators
designed to operate from a single power supply.
Operation from dual supplies is also possible if the
difference between the two supplies is 2 V to 18 V.
Each device features extremely high input
impedance (typically greater than 10¹² Ω),
allowing direct interfacing with high-impedance
sources. The outputs are n-channel open-drain
configurations and can be connected to achieve
positive-logic wired-AND relationships.
NC – No internal connection
symbol (each comparator)
IN +
OUT
IN –
The TLC374 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 1000-V
ESD rating using human body model testing. However, care should be exercised in handling this device as
exposure to ESD may result in degradation of the device parametric performance.
The TLC374C is characterized for operation from 0°C to 70°C. The TLC374I is characterized for operation from
– 40° to 85°C. The TLC374M is characterized for operation over full military temperature range of
– 55°C to 125°C. The TLC374Q is characterized for operation from – 40°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinCMOS is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  1999, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1