THS4503-EP_17 Datasheet, PDF (1/40 Pages) Texas Instruments – WIDEBAND, LOW-DISTORTION FULLY DIFFERENTIAL AMPLIFIERS

www.ti.com
DGN−8
THS4503−EP
SGLS291A − APRIL 2005 − JANUARY 2012
WIDEBAND, LOW-DISTORTION FULLY DIFFERENTIAL AMPLIFIERS
FEATURES
D Controlled Baseline
D One Assembly/Test Site, One Fabrication Site
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product-Change Notification
D Qualification Pedigree⁽¹⁾
D Fully Differential Architecture
D Bandwidth: 370 MHz
D Slew Rate: 2800 V/μs
D IMD₃: −95 dBc at 30 MHz
D OIP₃: 51 dBm at 30 MHz
D Output Common-Mode Control
D Wide Power Supply Voltage Range: 5 V, ±5 V,
12 V, 15 V
D Centered Input Common-Mode Range
D Evaluation Module Available
(1) _{Component qualification in accordance with JEDEC and industry}
standards to ensure reliable operation over an extended
temperaturerange. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life.
APPLICATIONS
D High Linearity Analog-to-Digital Converter
Preamplifier
D Wireless Communication Receiver Chains
D Single-Ended to Differential Conversion
D Differential Line Driver
D Active Filtering of Differential Signals
V_IN− 1
V_OCM 2
V_S+ 3
V_OUT+ 4
8 V_IN+
7 NC
6 V_S−
5 V_OUT−
RELATED DEVICES
DEVICE⁽¹⁾
THS4500/1
THS4502/3
THS4120/1
THS4130/1
THS4140/1
THS4150/1
DESCRIPTION
370 MHz, 2800 V/μs, V_ICR Includes V_S−
370 MHz, 2800 V/μs, Centered V_ICR
3.3 V, 100 MHz, 43 V/μs, 3.7 nV√Hz
±15 V, 150 MHz, 51 V/μs, 1.3 nV√Hz
±15 V, 160 MHz, 450 V/μs, 6.5 nV√Hz
±15 V, 150 MHz, 650 V/μs, 7.6 nV√Hz
(1) _{Even numbered devices feature power-down capability}
DESCRIPTION
The THS4503 is a high-performance fully differential amplifier from Texas Instruments. The THS4503, without
power-down capability, set new performance standards for fully differential amplifiers with unsurpassed linearity,
supporting 14-bit operation through 40 MHz. Package options include the 8-pin MSOP with PowerPAD™ for a smaller
footprint, enhanced ac performance, and improved thermal dissipation capability.
WARNING:
The THS4503 may have low−level oscillation when the die temperature (also known as the junction
temperature) exceeds 605C. These devices are not recommended for new designs where the die temperature
is expected to exceed 605C. For more information, see Maximum Die Temperature to Oscillation.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA
information current as of publication date. Products conform to specifications per
the terms of Texas Instruments standard warranty. Production processing does
not necessarily include testing of all parameters.
Copyright © 2005 − 2012, Texas Instruments Incorporated