THS4304-SP Datasheet, PDF (1/22 Pages) Texas Instruments – RAD-TOLERANT CLASS V, WIDEBAND OPERATIONAL AMPLIFIER

THS4304-SP
www.ti.com
SGDS038A – SEPTEMBER 2007 – REVISED OCTOBER 2007
RAD-TOLERANT CLASS V, WIDEBAND OPERATIONAL AMPLIFIER
FEATURES
1
• Wide Bandwidth: 1 GHz
• Minimum Gain of 2 V/V (6 dB)
• High Slew Rate: 800 V/μs
• Low Voltage Noise: 2.4 nV/√Hz
• Single Supply: 5 V, 3 V
• Quiescent Current: 18 mA
• Rad-Tolerant: 150 kRad (Si) TID
• QML-V Qualified, SMD 5962-07219
APPLICATIONS
• Active Filter
• ADC Driver
• Ultrasound
• Gamma Camera
• RF/Telecom
DESCRIPTION/ORDERING INFORMATION
The THS4304 is a wideband, voltage-feedback
operational amplifier designed for use in high-speed
analog signal processing chains operating with a
single 5 V power supply. Developed in the BiCom3
silicon germanium process technology, the THS4304
offers best-in-class performance using a single 5 V
supply as opposed to previous generations of
operational amplifiers requiring ±5 V supplies.
The THS4304 is a traditional voltage-feedback
topology that provides the following benefits:
balanced inputs, low offset voltage and offset current,
low offset drift, high common mode and power supply
rejection ratio.
The THS4304 is offered in 10-pin ceramic flatpack
(U) and is specified over the full military temperature
range, –55°C to 125°C.
DIFFERENTIAL ADC DRIVE
From
50 W
Source
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated