PTB48510_14 Datasheet, PDF (1/18 Pages) Texas Instruments – DUAL COMPLEMENTARY-OUTPUT DC/DC CONVERTER FOR DSL

Not Recommended for New Designs
www.ti.com
PTB48510
PTB48511
SLTS219F – FEBRUARY 2004 – REVISED MARCH 2007
DUAL COMPLEMENTARY-OUTPUT DC/DC CONVERTER FOR DSL
Check for Samples: PTB48510, PTB48511
FEATURES
1
• Dual Complementary Outputs
(±5 V, ±12 V, or ±15 V)
• Input Voltage Range: 36 V to 75 V
• On/Off Enable for Sequencing
• 1500 V_DC Isolation
• Overcurrent Protection
• Overvoltage Protection (PTB48511 only)
• Over Temperature Shutdown
• Undervoltage Lockout
• Temperature Range: –40°C to 85°C
• Industry Standard Outline
• Fixed Frequency Operation
• Synchronizes with PTB48500
• Powers Line Drivers for AC-7 and Other xDSL
Chipsets
• Safety Approvals:
– EN 60950
– UL/cUL 60950
STAND-ALONE APPLICATION
PTB4851x
+V_I
1 +V_I
V_O1 5
I_O1
L
O
A
D
2 Sync In COM 6
COM
I_O2
L
3 Enable V_OAdj 7
O
A
-V_I
D
4 -V_I
*V_O2 8
*V_O1 @ | V_O2 |
*V_O2is the negative voltage.
UDG-07040
DESCRIPTION
The PTB4851x series of isolated DC/DC converter
modules produce a complementary pair of regulated
supply voltages for powering line-driver devices in
xDSL telecom applications. The modules operate
from a standard telecom (–48 V) central office (CO)
supply and can provide up to a 72 W of power in a
balanced load configuration.
The A-suffix module (±5 V) is designed to power the
line driver devices for the AC-7 ADSL chipset. Other
voltage options powers other analog applications
requiring a complementary supply with relatively
balanced loads.o
Both the PTB48510 and PTB48511 include an
“on/off” enable control, output current limit, over-
temperature protection, and input under-voltage
lockout (UVLO). The PTB48511 adds output
overvoltage protection (OVP).
The control inputs, Enable and Sync In, are
compatible with the EN Out and Sync Out signals of
the PTB48500 DC/DC converter. This allows the
power-up and switching frequency of the PTB4851x
modules to be directly controlled from a PTB48500.
Together the PTB48500 and PTB4851xA converters
meet all the system power and sequencing
requirements of the AC- ADSL chipset.
The PTB4851x uses double-sided surface mount
technology contruction. The package size is based on
the industry standard outline and does not require a
heatsink. Both through-hole and surface mount pin
configurations are available.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2007, Texas Instruments Incorporated