PGA411-Q1 Datasheet, PDF (1/105 Pages) Texas Instruments – Resolver Sensor Interface

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
PGA411-Q1
SLASE76D – NOVEMBER 2015 – REVISED APRIL 2016
PGA411-Q1 Resolver Sensor Interface
1 Features
•1 Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
Range
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C4B
• Resolver to Digital Converter (RDC)
• Exciter Preamplifier and Power Amplifier
• Exciter-Boost Power Supply With Spread
Spectrum
• Analog Front-End
• Automatic Offset Calibration
• Type-II PI Controller Tracking Loop
• Parallel, Encoder, or SPI Data Output
• Analog Data Output
• SafeTI™ Semiconductor Component
– Designed for Functional Safety Applications
– Developed According to the Requirements of
ISO 26262
• Automatic and Manual Phase Correction
• Sensor-Input Fault Detection
• Diagnostics Interrupt Output
• Internal and External Oscillator
• Analog and Logic Built-In Self-Test for Fault
Detection
• 64-Pin HTQFP PowerPAD™ IC Package
3 Description
The PGA411-Q1 device is a resolver to digital
converter, with an integrated exciter-amplifier and
boost-regulator power supply, that is capable of both
exciting and reading the sine and cosine angle from a
resolver sensor. The integration of the exciter
amplifier and boost supply with protection in the
PGA411-Q1 device enables cost reductions of the bill
of materials (BOM) and space reductions on the
printed circuit board (PCB) because of the elimination
of most external and passive components.
The PGA411-Q1 device also has an internal clock for
generating a sine wave used for sensor excitation.
The architecture of the analog front-end (AFE) allows
the user to output 10 bits or 12 bits of resolution for
the angle position and velocity. Because of high
integration, the PGA411-Q1 device has diagnostics
and protection on each internal block inside the
device. The integrated diagnostics monitor can signal
a fault condition through a dedicated pin which can
be used as a MCU interrupt. These features allow
flexibility in both resolver sensor choice and platform
scalability. Additionally, the PGA411-Q1 was
designed according to the requirements of ISO 26262
for functional safety applications.
PART
NUMBER
PGA411-Q1
Device Information⁽¹⁾
PACKAGE
BODY SIZE (NOM)
HTQFP (64)
10.00 mm × 10.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified System Diagram
2 Applications
• Motor Control
• HEV/EV Motor Inverters
• Electrical Power Steering
• Integrated Start-Stop Generators
• Servo Drives
• AC Drives
• Industrial Robots
• CNC Machinery
• Elevators/Lifts
• Injection Molding Machinery
Resolver Sensor
Resolver to Digital Interface System Control
&
SIN
PGA411-Q1
I/O
COS
EXC
MCU
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.