OPA827_16 Datasheet, PDF (1/36 Pages) Texas Instruments – Low-Noise, High-Precision, JFET-Input Low-Noise, High-Precision, JFET-Input

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
OPA827
SBOS376I – NOVEMBER 2006 – REVISED JULY 2016
OPA827 Low-Noise, High-Precision, JFET-Input
Operational Amplifier
1 Features
•1 Input Voltage Noise Density:
4 nV/√Hz at 1 kHz
• Input Voltage Noise:
0.1 Hz to 10 Hz: 250 nV_PP
• Input Bias Current: 10 pA (Maximum)
• Input Offset Voltage: 150 µV (Maximum)
• Input Offset Drift: 2 µV/°C (Maximum)
• Gain Bandwidth: 22 MHz
• Slew Rate: 28 V/µs
• Quiescent Current: 4.8 mA/Ch
• Wide Supply Range: ±4 V to ±18 V
• Packages: 8-Pin SOIC and 8-Pin VSSOP
2 Applications
• ADC Drivers
• DAC Output Buffers
• Test Equipment
• Medical Equipment
• PLL Filters
• Seismic Applications
• Transimpedance Amplifiers
• Integrators
• Active Filters
3 Description
The OPA827 series of JFET operational amplifiers
combine outstanding DC precision with excellent AC
performance. These amplifiers offer low offset voltage
(150 µV, maximum), very low drift over temperature
(0.5 µV/°C, typical), low-bias current (3 pA, typical),
and very low 0.1-Hz to 10-Hz noise (250 nV_PP,
typical). The device operates over a wide supply
voltage range, ±4 V to ±18 V on a low supply current
(4.8 mA/Ch, typical).
Excellent AC characteristics, such as a 22-MHz gain
bandwidth product (GBW), a slew rate of 28 V/µs,
and precision DC characteristics make the OPA827
series well-suited for a wide range of applications
including 16-bit to 18-bit mixed signal systems,
transimpedance (I/V-conversion) amplifiers, filters,
precision ±10-V front ends, and professional audio
applications.
The OPA827 is available in both 8-pin SOIC and 8-
pin VSSOP surface-mount packages, and is specified
from –40°C to 125°C.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
OPA827
SOIC (8)
VSSOP (8)
4.90 mm × 3.91 mm
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Input Voltage Noise Density vs Frequency
100
V_S = ±18V
0.1-Hz to 10-Hz Noise
10
1
0.1
1
10
100
1k
10k
Frequency (Hz)
Time (1s/div)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.