OPA348-Q1_16 Datasheet, PDF (1/32 Pages) Texas Instruments – CMOS Rail-to-Rail Operational Amplifier

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
OPA348-Q1, OPA2348-Q1, OPA4348-Q1
SBOS465C – JANUARY 2009 – REVISED JANUARY 2016
OPAx348-Q1 1-MHz 45-µA CMOS Rail-to-Rail Operational Amplifier
1 Features
•1 Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
Range
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C4B
• Low Quiescent Current (I_Q): 45 µA (Typ)
• Low Cost
• Rail-to-Rail Input and Output
• Single Supply: 2.1 V to 5.5 V
• Input Bias Current: 0.5 pA (Typ)
• High Speed: Power With Bandwidth: 1 MHz
2 Applications
• Portable Equipment
• Battery-Powered Equipment
• Smoke Alarms
• CO Detectors
• HEV/EV and Power Train
• Infotainment and Cluster
• Medical Instrumentation
3 Description
The OPAx348-Q1 series of devices are single-supply,
low-power CMOS operational amplifiers. Featuring an
extended bandwidth of 1 MHz and a supply current of
45 µA, the OPAx348-Q1 family of devices is useful
for low-power applications on single supplies of 2.1 V
to 5.5 V.
Low supply current of 45 µA and an input bias current
of 0.5 pA make the OPAx348-Q1 family of devices an
optimal candidate for low-power, high-impedance
applications such as smoke detectors and other
sensors.
The OPA348-Q1 device is available in both the
SOT23-5 (DBV) and the SOIC (D) packages. The
OPA2348-Q1 device is available in the SOIC-8 (D)
package. The OPA4348-Q1 device is available in the
TSSOP-14 (PW) package. The automotive
temperature range of –40°C to +125°C over all
supply voltages offers additional design flexibility.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
OPA348-Q1
SOT-23 (5)
SOIC (8)
2.90 mm × 1.60 mm
4.90 mm × 3.91 mm
OPA2348-Q1
SOIC (8)
4.90 mm × 3.91 mm
OPA4348-Q1
TSSOP (14)
5.00 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Noninverting Configuration Driving ADS7822
5V
0.1 µF
0.1 µF
VIN
1/2
OPA2348-Q1
VIN = 0 V to 5 V for
0-V to 5-V output.
500 Ω
3300 pF
8 V+
+IN
2
–IN
3
ADS7822
12-Bit A/D
GND 4
1 VREF
7
DCLOCK
DOUT ⁶
5
CS/SHDN
RC network filters high-frequency noise.
Serial
Interface
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.