OPA140A-DIE Datasheet, PDF (1/4 Pages) Texas Instruments – HIGH-PRECISION, LOW-NOISE, RAIL-TO-RAIL OUTPUT

OPA140A-DIE
www.ti.com
SBOS610B – MARCH 2012 – REVISED MARCH 2012
HIGH-PRECISION, LOW-NOISE, RAIL-TO-RAIL OUTPUT,
11-MHZ JFET OPERATIONAL AMPLIFIER
Check for Samples: OPA140A-DIE
FEATURES
1
• Very Low Offset Drift
• Very Low Offset
• Low Input Bias Current
• Very Low 1/f Noise
• Low Noise
• Slew Rate
• Low Supply Current
• Input Voltage Range Includes V– Supply
• Single-Supply Operation: 4.5 V to 36 V
• Dual-Supply Operation: ±2.25 V to ±18 V
• No Phase Reversal
APPLICATIONS
• Battery-Powered Instruments
• Industrial Controls
• Medical Instrumentation
• Photodiode Amplifiers
• Active Filters
• Data Acquisition Systems
• Automatic Test Systems
DESCRIPTION
The OPA140A operational amplifier is a low-power JFET input amplifier that features good drift and low input
bias current. The rail-to-rail output swing and input range that includes V– allow designers to take advantage of
the low-noise characteristics of JFET amplifiers while also interfacing to modern, single-supply, precision analog-
to-digital converters (ADCs) and digital-to-analog converters (DACs). The OPA140A runs on a single 4.5-V to
36-V supply or dual ±2.25-V to ±18-V supplies.
PRODUCT
OPA140A
PACKAGE
DESIGNATOR
TD
ORDERING INFORMATION⁽¹⁾
PACKAGE ⁽²⁾
ORDERABLE PART NUMBER
Bare Die In Waffle Pack
OPA140ATDD1
OPA140ATDD2
PACKAGE QUANTITY
252
10
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Processing is per the Texas Instruments commercial production baseline and is in compliance with the Texas Instruments Quality
Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room
temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not
warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated