MSP430BT5190 Datasheet, PDF (1/99 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

www.ti.com
MSP430BT5190
SLAS703 – APRIL 2010
MIXED SIGNAL MICROCONTROLLER
FEATURES
1
• Designed for Use With CC2560 TI Bluetooth ®
Based Solutions ⁽¹⁾
• Commercially Licensed MindTree Ethermind
Bluetooth Stack for MSP430
– Bluetooth v2.1 + Enhanced Data Rate (EDR)
Compliant
– Serial Port Profile (SPP)
– Sample Applications
• Low Supply Voltage Range: 1.8 V to 3.6 V
• Ultralow Power Consumption
– Active Mode (AM):
All System Clocks Active
230 µA/MHz at 8 MHz, 3.0 V, Flash Program
Execution (Typical)
110 µA/MHz at 8 MHz, 3.0 V, RAM Program
Execution (Typical)
– Standby Mode (LPM3):
Real-Time Clock With Crystal , Watchdog,
and Supply Supervisor Operational, Full
RAM Retention, Fast Wake-Up:
1.7 µA at 2.2 V, 2.1 µA at 3.0 V (Typical)
Low-Power Oscillator (VLO),
General-Purpose Counter, Watchdog, and
Supply Supervisor Operational, Full RAM
Retention, Fast Wake-Up:
1.2 µA at 3.0 V (Typical)
– Off Mode (LPM4):
Full RAM Retention, Supply Supervisor
Operational, Fast Wake-Up:
1.2 µA at 3.0 V (Typical)
– Shutdown Mode (LPM4.5):
0.1 µA at 3.0 V (Typical)
• Wake-Up From Standby Mode in Less Than
5 µs
• 16-Bit RISC Architecture
• Flexible Power Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
– Supply Voltage Supervision, Monitoring,
and Brownout
• Unified Clock System
– FLL Control Loop for Frequency
Stabilization
– Low-Power/Low-Frequency Internal Clock
Source (VLO)
– Low-Frequency Trimmed Internal Reference
Source (REFO)
– 32-kHz Crystals
– High-Frequency Crystals up to 32 MHz
• 16-Bit Timer TA0, Timer_A With Five
Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven
Capture/Compare Shadow Registers
• Up to Four Universal Serial Communication
Interfaces
– USCI_A0, USCI_A1, USCI_A2, and USCI_A3
Each Supporting
– Enhanced UART supporting
Auto-Baudrate Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0, USCI_B1, USCI_B2, and USCI_B3
Each Supporting
– I²C^TM
– Synchronous SPI
• 12-Bit Analog-to-Digital (A/D) Converter
– Internal Reference
– 14 External Channels, 2 Internal Channels
• Hardware Multiplier Supporting 32-Bit
Operations
• Serial Onboard Programming, No External
Programming Voltage Needed
• Three Channel Internal DMA
• Basic Timer With Real-Time Clock Feature
• Family Members are Summarized in Table 1
• For Complete Module Descriptions, See the
MSP430x5xx Family User's Guide (SLAU208)
(1) The Bluetooth word mark and logos are owned by Bluetooth
SIG, Inc., and any use of such marks by Texas Instruments is
under license.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2010, Texas Instruments Incorporated