|
LMC6482_16 Datasheet, PDF (1/39 Pages) Texas Instruments – LMC6482 CMOS Dual Rail-to-Rail Input and Output Operational Amplifier | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LMC6482
SNOS674E â NOVEMBER 1997 â REVISED APRIL 2015
LMC6482 CMOS Dual Rail-to-Rail Input and Output Operational Amplifier
1 Features
â¢1 Typical Unless Otherwise Noted
⢠Rail-to-Rail Input Common-Mode Voltage Range
(Ensured Over Temperature)
⢠Rail-to-Rail Output Swing (Within 20-mV of Supply
Rail, 100-kΩ Load)
⢠Ensured 3-V, 5-V, and 15-V Performance
⢠Excellent CMRR and PSRR: 82 dB
⢠Ultralow Input Current: 20 fA
⢠High Voltage Gain (R L = 500 k Ω): 130 dB
⢠Specified for 2-kΩ and 600-Ω Loads
⢠Power-Good Output
⢠Available in VSSOP Package
2 Applications
⢠Data Acquisition Systems
⢠Transducer Amplifiers
⢠Hand-held Analytic Instruments
⢠Medical Instrumentation
⢠Active Filter, Peak Detector, Sample and Hold, pH
Meter, Current Source
⢠Improved Replacement for TLC272, TLC277
3 Description
The LMC6482 device provides a common-mode
range that extends to both supply rails. This rail-to-rail
performance combined with excellent accuracy, due
to a high CMRR, makes it unique among rail-to-rail
input amplifiers. The device is ideal for systems, such
as data acquisition, that require a large input signal
range. The LMC6482 is also an excellent upgrade for
circuits using limited common-mode range amplifiers
such as the TLC272 and TLC277.
Maximum dynamic signal range is assured in low
voltage and single supply systems by the rail-to-rail
output swing of the LMC6482. The rail-to-rail output
swing is ensured for loads down to 600 Ω of the
device. Ensured low-voltage characteristics and low-
power dissipation make the LMC6482 especially well-
suited for battery-operated systems. LMC6482 is also
available in a VSSOP package, which is almost half
the size of a SOIC-8 device. See the LMC6484 data
sheet for a quad CMOS operational amplifier with
these same features.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOIC (8)
4.90 mm à 3.91 mm
LMC6482
VSSOP (8)
3.00 mm à 3.00 mm
PDIP (8)
9.81 mm à 6.35 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Rail-to-Rail Input
Rail-to-Rail Output
A1 ±0.18 V
3V
A2 ±0.18 V
3V
0V
500mV
50s
C001
0V
500mV
50s
C002
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |