LMC6001-MIL Datasheet, PDF (1/18 Pages) Texas Instruments – Ultra, Ultra-Low Input Current Amplifier

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
LMC6001-MIL Ultra, Ultra-Low Input Current Amplifier
LMC6001-MIL
SNOSD60 – JUNE 2017
1 Features
•1 (Maximum Limit, 25°C Unless Otherwise Noted)
• Input Current (100% Tested): 25 fA
• Input Current Over Temperature: 2 pA
• Low Power: 750 µA
• Low V_OS: 350 µV
• Low Noise: 22 nV/√Hz at 1 kHz Typical
2 Applications
• Electrometer Amplifiers
• Photodiode Preamplifiers
• Ion Detectors
• A.T.E. Leakage Testing
3 Description
Featuring 100% tested input currents of 25 fA
maximum, low operating power, and ESD protection
of 2000 V, the LMC6001-MIL device achieves a new
industry benchmark for low input current operational
amplifiers. By tightly controlling the molding
compound, Texas Instruments is able to offer this
ultra-low input current in a lower cost molded
package.
To avoid long turnon settling times common in other
low input current op amps, the LMC6001A is tested
three times in the first minute of operation. Even units
that meet the 25-fA limit are rejected if they drift.
Because of the ultra-low input current noise of 0.13
fA/√Hz, the LMC6001-MIL can provide almost
noiseless amplification of high resistance signal
sources. Adding only 1 dB at 100 kΩ, 0.1 dB at 1 MΩ
and 0.01 dB or less from 10 MΩ to 2,000 MΩ, the
LMC6001-MIL is an almost noiseless amplifier.
The LMC6001-MIL is ideally suited for electrometer
applications requiring ultra-low input leakage such as
sensitive photodetection transimpedance amplifiers
and sensor amplifiers. Because input referred noise is
only 22 nV/√Hz, the LMC6001-MIL can achieve
higher signal to noise ratio than JFET input type
electrometer amplifiers. Other applications of the
LMC6001-MIL include long interval integrators, ultra-
high input impedance instrumentation amplifiers, and
sensitive electrical-field measurement circuits.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LMC6001-MIL
PDIP (8)
TO-99 (8)
9.81 mm × 6.35 mm
9.08 mm × 9.08 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
R2
R1
VIN
±
LMC6001
+
VOUT
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.