LM5071MT-50-NOPB Datasheet, PDF (1/24 Pages) Texas Instruments – LM5071 Power Over Ethernet PD Controller with Auxiliary Power Interface

LM5071
www.ti.com
SNVS409E – NOVEMBER 2005 – REVISED APRIL 2013
LM5071 Power Over Ethernet PD Controller with Auxiliary Power Interface
Check for Samples: LM5071
FEATURES
1
•2 Compatible with 12V AC Adapters
• Fully Compliant 802.3af Power Interface Port
• 80V, 1Ω, 400 mA Internal MOSFET
• Detection Resistor Disconnect Function
• Programmable Classification Current
• Programmable Under-voltage Lockout with
Programmable Hysteresis
• Thermal Shutdown Protection
• Auxiliary Power Enable Pin
• Current Mode Pulse Width Modulator
• Supports both Isolated and Non-Isolated
Applications
• Error Amplifier and Reference for Non-Isolated
Applications
• Programmable Oscillator Frequency
• Programmable Soft-Start
• 80% Maximum Duty Cycle Limiter, Slope
Compensation (-80 device)
• 50% Maximum Duty Cycle Limiter, No Slope
Compensation (-50 device)
PACKAGES
• TSSOP-16
DESCRIPTION
The LM5071 power interface port and pulse width
modulation (PWM) controller provides a complete
integrated solution for Powered Devices (PD) that
connect into Power over Ethernet (PoE) systems.
The LM5071 is specifically designed for the PD
that must accept power from auxiliary sources
such as AC adapters. The auxiliary power interface
of the LM5071 activates the PWM controller when the
ac adapter is connected to power the PD when PoE
network power is unavailable. The LM5071 integrates
an 80V, 400mA line connection switch and
associated control for a fully IEEE 802.3af compliant
interface with a full featured current mode pulse width
modulator dc-dc converter. All power sequencing
requirements between the controller interface and
switch mode power supply (SMPS) are integrated into
the IC.
Block Diagram
PoE (+)
AC
+
Adapter _{_}
Jack
IEEE 802.3 af Interface
UVLO
Signature Detection
Classification
LM5071
Hot Swap
DC - DC
AUX
Auxiliary
Power
In-rush and Fault
Current Limiting
Converter
PWM Controller
Enable
Current Mode
VOUT
Feedback
PoE (-)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated