ISO7421-EP_16 Datasheet, PDF (1/24 Pages) Texas Instruments – Low-Power Dual Digital Isolators

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
ISO7421-EP Low-Power Dual Digital Isolators
ISO7421-EP
SLLSEN3 – DECEMBER 2015
1 Features
•1 Highest Signaling Rate: 1 Mbps
• Low Power Consumption, Typical I_CC per Channel
(3.3-V Operation): 1.5 mA
• Low Propagation Delay – 9 ns Typical
• Low Skew – 300 ps Typical
• Wide T_J Range: –55°C to 136°C
• 50-kV/μs Transient Immunity, Typical
• Over 25-Year Isolation Integrity at Rated Voltage
• Operates From 3.3-V and 5-V Supply and Logic
Levels
• 3.3-V and 5-V Level Translation
• Narrow Body SOIC-8 Package
• Safety and Regulatory Approvals:
– 4242 V_PK Isolation per DIN V VDE V 0884-10
and DIN EN 61010-1
– 2500 V_RMS Isolation for 1 minute per UL 1577
– CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 Standards
– CQC Certification per GB4943.1-2011
2 Applications
• Optocoupler Replacement in:
– Industrial Fieldbus
– Profibus
– Modbus
– DeviceNet™ Data Buses
– Servo Control Interface
– Motor Control
– Power Supplies
– Battery Packs
3 Description
The ISO7421-EP device provides galvanic isolation
up to 2500 V_RMS for 1 minute per UL. The ISO7421-
EP device has two isolated channels. Each isolation
channel has a logic input and output buffer separated
by a silicon dioxide (SiO₂) insulation barrier. Used in
conjunction with isolated power supplies, the device
prevents noise currents on a data bus or other circuit
from entering the local ground and interfering with or
damaging sensitive circuitry.
This device have TTL input thresholds and require
two supply voltages, 3.3 or 5 V, or any combination.
All inputs are 5-V tolerant when supplied from a 3.3-V
supply.
The ISO7421-EP device is specified for signaling
rates up to 1 Mbps. Due to its fast response time,
under most cases, this device will also transmit data
with much shorter pulse widths. Designers should
add external filtering to remove spurious signals with
input pulse duration <20 ns if desired.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
ISO7421-EP
SOIC (8)
4.90 mm × 3.91 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Conceptual Block Diagram of a Digital Capacitive Isolator
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.