DP83848C_15 Datasheet, PDF (1/86 Pages) Texas Instruments – Industrial Controls and Factory Automation

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DP83848C, DP83848I
DP83848VYB, DP83848YB
SNLS266E – MAY 2007 – REVISED MARCH 2015
DP83848C/I/VYB/YB PHYTER™ QFP Single Port 10/100 Mb/s Ethernet
Physical Layer Transceiver
1 Introduction
1.1 Features
1
• Multiple Temperature Range from –40°C to 105°C
• Low-Power 3.3-V, 0.18-µm CMOS Technology
• Low-Power Consumption < 270 mW Typical
• 3.3-V MAC Interface
• Auto-MDIX for 10/100 Mb/s
• Energy Detection Mode
• 25-MHz Clock Output
• SNI Interface (Configurable)
• RMII Rev. 1.2 Interface (Configurable)
• MII Serial Management Interface (MDC and MDIO)
• IEEE 802.3 MII
• IEEE 802.3 Auto-Negotiation and Parallel
Detection
• IEEE 802.3 ENDEC, 10BASE-T Transceivers and
Filters
• IEEE 802.3 PCS, 100BASE-TX Transceivers and
Filters
• IEEE 1149.1 JTAG
• Integrated ANSI X3.263 Compliant TP-PMD
Physical Sub-Layer with Adaptive Equalization and
Baseline Wander Compensation
• Error-Free Operation up to 150 Meters
• Programmable LED Support for Link, 10/100 Mb/s
Mode, Activity, Duplex and Collision Detect
• Single Register Access for Complete PHY Status
• 10/100 Mb/s Packet BIST (Built in Self Test)
1.2 Applications
• Automotive/Transportation
• Industrial Controls and Factory Automation
• General Embedded Applications
1.3 Description
The number of applications requiring Ethernet connectivity continues to increase, driving Ethernet enabled
devices into harsher environments.
The DP83848C/I/VYB/YB was designed to meet the challenge of these new applications with an extended
temperature performance that goes beyond the typical Industrial temperature range. The
DP83848C/I/VYB/YB is a highly reliable, feature rich, robust device which meets IEEE 802.3 standards
over multiple temperature ranges from commercial to extreme temperatures. This device is ideally suited
for harsh environments such as wireless remote base stations, automotive/transportation, and industrial
control applications.
It offers enhanced ESD protection and the choice of an MII or RMII interface for maximum flexibility in
MPU selection; all in a 48 pin package.
The DP83848VYB extends the leadership position of the PHYTER™ family of devices with a wide
operating temperature range. The TI line of PHYTER transceivers builds on decades of Ethernet expertise
to offer the high performance and flexibility that allows the end user an easy implementation tailored to
meet these application needs.
PART NUMBER
Device Information⁽¹⁾
PACKAGE
DP83848VYB/YB
HLQFP (48)
DP83848I/C
LQFP (48)
(1) For more information, see Section 9, Mechanical, Packaging, and Orderable Information.
BODY SIZE (NOM)
7.00 mm × 7.00 mm
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.