DLP9500UV Datasheet, PDF (1/54 Pages) Texas Instruments – LVDS Type A DMD

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DLP9500UV
DLPS033B – NOVEMBER 2014 – REVISED JUNE 2015
DLP9500UV DLP^® 0.95 UV 1080p 2x LVDS Type A DMD
1 Features
•1 0.95-Inch Diagonal Micromirror Array
– 1920 × 1080 Array of Aluminum, Micrometer-
Sized Mirrors (1080p Resolution)
– 10.8-µm Micromirror Pitch
– ±12° Micromirror Tilt Angle (Relative to Flat
State)
– Designed for Corner Illumination
• Designed for Use With UV Light (363 to 420 nm):
– Window Transmission 98% (Single Pass,
Through Two Window Surfaces) (Nominal)
– Micromirror Reflectivity 88% (Nominal)
– Array Diffraction Efficiency 85% (Nominal)
– Array Fill Factor 92% (Nominal)
• Four 16-Bit, Low-Voltage Differential Signaling
(LVDS), Double Data Rate (DDR) Input Data
Buses
• Up to 400-MHz Input Data Clock Rate
• 42.2-mm × 42.2-mm × 7-mm Package Footprint
• Hermetic Package
2 Applications
• Industrial:
– Direct Imaging Lithography
– Laser Marking and Repair Systems
– Computer to Plate Printers
– Rapid Prototype Machines
– 3D Printers
• Medical:
– Opthalmology
– Photo Therapy
– Hyper-Spectral Imaging
3 Description
DLP9500UV is a digitally controlled micro-
electromechanical system (MEMS) spatial light
modulator (SLM). When coupled to an appropriate
optical system, the DLP9500UV can be used to
modulate the amplitude, direction, and/or phase of
incoming light.
The DLP95000UV chipset is a new DMD addition to
the DLP^® Discovery 4100 platform, which enables
high resolution and high performance spatial light
modulation beyond the visible spectrum into the UVA
spectrum (363 nm to 420 nm). The DLP9500UV
digital micromirror device (DMD) is designed with a
special window that is optimized for UV transmission.
The DLP9500UV is the 0.95 1080p DMD, with a
hermetic package, that is sold with the following
dedicated chipset (see Figure 7):
• Dedicated DLPC410 controller for high speed
pattern rates of >23000 Hz (1-bit binary) and
>1700 Hz (8-bit gray)
• One unit DLPR410 (DLP Discovery 4100
Configuration PROM)
• Two units DLPA200 (DMD micromirror drivers)
Reliable function and operation of the DLP9500UV
requires that it be used in conjunction with the other
components of the chipset. A dedicated chipset
provides developers easier access to the DMD as
well as high speed, independent micromirror control.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DLP9500UV
LCCC (355)
42.16 mm × 42.16 mm
x 7.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Application Schematic
LED
Driver
DLP9500UV
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.