CD74HCT4067-Q1 Datasheet, PDF (1/14 Pages) Texas Instruments – HIGH-SPEED CMOS LOGIC 16-CHANNEL ANALOG MULTIPLEXER and DEMULTIPLEXER

CD74HCT4067-Q1
SCLS601B – DECEMBER 2004 – REVISED AUGUST 2012
HIGH-SPEED CMOS LOGIC 16-CHANNEL ANALOG MULTIPLEXER and DEMULTIPLEXER
Check for Samples: CD74HCT4067-Q1
1 FEATURES
•1 Qualified for Automotive Applications
V Max, V_IH = 2 V Min
• CMOS Input Compatibility: I_I ≤ 1 µA at V_OL, V_OH
• AEC-Q100 Test Guidance With the Following
Results:
– Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
2 APPLICATIONS
• Automotive
• Analog Switch
– Device HBM ESD Classification Level H1A
• Analog Multiplexer and Demultiplexer
– Device CDM ESD Classification Level C2
• Wide Analog Input Voltage Range
• Low ON Resistance
M PACKAGE
(TOP VIEW)
– 70 Ω Typical (V_CC = 4.5 V)
• Fast Switching and Propagation Speeds
• Break-Before-Make Switching
– 6 ns Typical (V_CC = 4.5 V)
• Fanout (Over Temperature Range)
– Standard Outputs: 10 LSTTL Loads
– Bus Driver Outputs: 15 LSTTL Loads
• Balanced Propagation Delay and Transition Times
• Significant Power Reduction Compared to LSTTL
Logic ICs
• 4.5-V to 5.5-V Operation
COMMON I/O 1
I₇ 2
I₆ 3
I₅ 4
I₄ 5
I₃ 6
I₂ 7
I₁ 8
I₀ 9
S₀ 10
S₁ 11
GND 12
24 V_CC
23 I₈
22 I₉
21 I₁₀
20 I₁₁
19 I₁₂
18 I₁₃
17 I₁₄
16 I₁₅
15 E
14 S₂
13 S₃
• Direct LSTTL Input Logic Compatibility: V_IL = 0.8
3 DESCRIPTION
The CD74HCT4067-Q1 device is a digitally controlled analog switch that utilizes silicon-gate CMOS technology
to achieve operating speeds similar to LSTTL, with the low power consumption of standard CMOS integrated
circuits.
This analog multiplexer and demultiplexer controls analog voltages that may vary across the voltage supply
range. It is a bidirectional switch, thus allowing any analog input to be used as an output and vice-versa. The
switch has low (on) resistance and low (off) leakages. In addition, the device has an enable control that, when
high, disables all switches to their off state.
T_A
–40°C to 125°C
ORDERING INFORMATION⁽¹⁾
PACKAGE ⁽²⁾
ORDERABLE PART NUMBER⁽³⁾
DW-SOIC-M
Reel of 2000
CD74HCT4067QM96Q1
TOP-SIDE MARKING
HCT4067I
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(3) The suffix 96 denotes tape and reel.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.