CD54HC4316_14 Datasheet, PDF (1/23 Pages) Texas Instruments – High-Speed CMOS Logic Quad Analog Switch with Level Translation

Data sheet acquired from Harris Semiconductor
SCHS212D
February 1998 - Revised October 2003
CD54HC4316, CD74HC4316,
CD74HCT4316
High-Speed CMOS Logic
Quad Analog Switch with Level Translation
[ /Title
(CD74
HC431
6,
CD74
HCT43
16)
/Sub-
ject
(High-
Speed
CMOS
Features
• Wide Analog-Input-Voltage Range
V_CC - V_EE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to 10V
• Low “ON” Resistance
- 45Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . . . . .V_CC = 4.5V
- 35Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_CC = 6V
- 30Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . V_CC - V_EE = 9V
• Fast Switching and Propagation Delay Times
• Low “OFF” Leakage Current
• Built-In “Break-Before-Make” Switching
• Logic-Level Translation to Enable 5V Logic to
Accommodate ±5V Analog Signals
• Wide Operating Temperature Range . . . -55^oC to 125^oC
• HC Types
- 2V to 10V Operation
- High Noise Immunity: N_IL = 30%, N_IH = 30% of V_CC
at V_CC = 5V
• HCT Types
- Direct LSTTL Input Logic Compatibility,
V_IL= 0.8V (Max), V_IH = 2V (Min)
- CMOS Input Compatibility, I_l ≤ 1µA at V_OL, V_OH
Description
The ’HC4316 and CD74HCT4316 contain four independent
digitally controlled analog switches that use silicon-gate
CMOS technology to achieve operating speeds similar to
LSTTL with the low power consumption of standard CMOS
integrated circuits.
In addition these devices contain logic-level translation
circuits that provide for analog signal switching of voltages
between ±5V via 5V logic. Each switch is turned on by a
high-level voltage on its select input (S) when the common
Enable (E) is Low. A High E disables all switches. The digital
inputs can swing between V_CC and GND; the analog
inputs/outputs can swing between V_CC as a positive limit
and V_EE as a negative limit. Voltage ranges are shown in
Figures 2 and 3.
Ordering Information
PART NUMBER
TEMP. RANGE
(^oC)
PACKAGE
CD54HC4316F3A
-55 to 125
16 Ld CERDIP
CD74HC4316E
-55 to 125
16 Ld PDIP
CD74HC4316M
-55 to 125
16 Ld SOIC
CD74HC4316MT
-55 to 125
16 Ld SOIC
CD74HC4316M96
-55 to 125
16 Ld SOIC
CD74HC4316NSR
-55 to 125
16 Ld SOP
CD74HC4316PW
-55 to 125
16 Ld TSSOP
CD74HC4316PWR
-55 to 125
16 Ld TSSOP
CD74HC4316PWT
-55 to 125
16 Ld TSSOP
CD74HCT4316E
-55 to 125
16 Ld PDIP
CD74HCT4316M
-55 to 125
16 Ld SOIC
CD74HCT4316MT
-55 to 125
16 Ld SOIC
CD74HCT4316M96
-55 to 125
16 Ld SOIC
NOTE: When ordering, use the entire part number. The suffixes 96
and R denote tape and reel. The suffix T denotes a small-quantity
reel of 250.
Pinout
CD54HC4316 (CERDIP)
CD74HC4316 (PDIP, SOIC, SOP, TSSOP)
CD74HCT4316 (PDIP, SOIC)
TOP VIEW
1Z 1
1Y 2
2Y 3
2Z 4
2S 5
3S 6
E7
GND 8
16 V_CC
15 1S
14 4S
13 4Z
12 4Y
11 3Y
10 3Z
9 V_EE
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.
Copyright © 2003, Texas Instruments Incorporated
1