BQ2000T_15 Datasheet, PDF (1/29 Pages) Texas Instruments – Programmable Multi-Chemistry Fast-Charge Management IC

bq2000T
www.ti.com
SLUS149D – MAY 1999 – REVISED JANUARY 2010
Programmable Multi-Chemistry Fast-Charge Management IC
Check for Samples: bq2000T
FEATURES
1
• Safe Management of Fast Charge for NiCd,
NiMH, or Li-Ion Battery Packs
• High-Frequency Switching Controller for
Efficient and Simple Charger Design
• Pre-Charge Qualification for Detecting
Shorted, Damaged, or Overheated Cells
• Fast-Charge Termination by ΔT/Δt for Nickel
Chemistries, Minimum Current for Li-Ion
Chemistries, Maximum Temperature, and
Maximum Charge Time
• Selectable Top-Off Mode for Achieving
Maximum Capacity in NiMH Batteries
• Programmable Trickle-Charge Mode for
Reviving Deeply Discharged Batteries and for
Postcharge Maintenance
• Built-in Battery Removal and Insertion
Detection
• Sleep Mode for Low Power Consumption
APPLICATIONS
• Multi-Chemistry Charger
• Nickel Charger
• High-Power, Multi-Cell Charger
8-Pin DIP or Narrow SOIC or TSSOP
SNS 1
VSS 2
LED 3
BAT 4
8 MOD
7 VCC
6 RC
5 TS
GENERAL DESCRIPTION
The bq2000T is a programmable, monolithic IC for
fast-charge management of nickel cadmium (NiCd),
nickel metal-hydride (NiMH), or lithium-ion (Li-Ion)
batteries in single- or multi-chemistry applications.
The bq2000T chooses the proper battery chemistry
(either nickel or lithium) and proceeds with the
optimal charging and termination algorithms. This
process eliminates undesirable, undercharged, or
overcharged conditions, and allows accurate and safe
termination of fast charge.
Depending on the chemistry, the bq2000T provides a
number of charge termination criteria:
• Rate of temperature rise (ΔT/Δt) (for NiCd and
NiMH)
• Minimum charge current (for Li-Ion)
• Maximum temperature
• Maximum charge time
For safety, the bq2000T inhibits fast charge until the
battery voltage and temperature are within
user-defined limits. If the battery voltage is below the
low-voltage threshold, the bq2000T uses
trickle-charge to condition the battery. For NiMH
batteries, the bq2000T provides an optional top-off
charge to maximize the battery capacity.
The integrated high-speed comparator allows the
bq2000T to be the basis for a complete,
high-efficiency battery charger circuit for both
nickel-based and lithium-based chemistries.
spacer between para and illustration
Pin Names
SNS Current-sense input
V_SS
System ground
LED Charge-status output
BAT Battery-voltage input
TS
Temperature-sense input
RC
Timer-program input
V_CC Supply-voltage input
MOD Modulation-control output
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2010, Texas Instruments Incorporated