ADC12DL066_15 Datasheet, PDF (1/33 Pages) Texas Instruments – 450 MHz Input Bandwidth A/D Converter

ADC12DL066
www.ti.com
SNAS188G – FEBRUARY 2004 – REVISED FEBRUARY 2013
ADC12DL066 Dual 12-Bit, 66 Msps, 450 MHz Input Bandwidth A/D Converter w/Internal
Reference
Check for Samples: ADC12DL066
FEATURES
1
•2 Choice of Binary or 2’s Complement Output
Format
• Single +3.3V Supply Operation
• Outputs 2.4V to 3.3V Compatible
• Pin Compatible with ADC12D040
• Power Down Mode
• Internal/External Reference
KEY SPECIFICATIONS
• Resolution: 12 Bits
• DNL: ±0.5 LSB (typ)
• SNR (f_IN = 10 MHz): 66 dB (typ)
• SFDR (f_IN = 10 MHz): 81 dB (typ)
• Power Consumption
– Operating: 686 mW (typ)
– Power Down Mode: 75 mW (typ)
APPLICATIONS
• Ultrasound and Imaging
• Instrumentation
• Communications Receivers
• Sonar/Radar
• xDSL
• Cable Modems
• DSP Front Ends
DESCRIPTION
The ADC12DL066 is a dual, low power monolithic
CMOS analog-to-digital converter capable of
converting analog input signals into 12-bit digital
words at 66 Megasamples per second (Msps),
minimum. This converter uses a differential, pipeline
architecture with digital error correction and an on-
chip sample-and-hold circuit to minimize die size and
power consumption while providing excellent dynamic
performance and a 450 MHz Full Power Bandwidth.
Operating on a single 3.3V power supply, the
ADC12DL066 achieves 10.7 effective bits and
consumes just 686 mW at 66 Msps, including the
reference current. The Power Down feature reduces
power consumption to 75 mW.
The differential inputs provide a full scale differential
input swing equal to 2 times V_REF with the possibility
of a single-ended input. Full use of the differential
input is recommended for optimum performance. The
digital outputs from the two ADCs are available on
separate 12-bit buses with an output data format
choice of offset binary or two’s complement.
To ease interfacing to lower voltage systems, the
digital output driver power pins of the ADC12DL066
can be connected to a separate supply voltage in the
range of 2.4V to the digital supply voltage.
This device is available in the 64-lead TQFP package
and will operate over the industrial temperature range
of −40°C to +85°C. An evaluation board is available
to ease the evaluation process.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated