ADC12DL065 Datasheet, PDF (1/35 Pages) National Semiconductor (TI) – Dual 12-Bit, 65 MSPS, 3.3V, 360mW A/D Converter

ADC12DL065
www.ti.com
SNAS249D – MARCH 2005 – REVISED APRIL 2013
ADC12DL065 Dual 12-Bit, 65 MSPS, 3.3V, 360mW A/D Converter
Check for Samples: ADC12DL065
FEATURES
1
•2 Single +3.3V Supply operation
• Internal Sample-and-Hold
• Internal Reference
• Outputs 2.4V to 3.6V Compatible
• Power Down Mode
• Duty Cycle Stabilizer
• Multiplexed Output Mode
APPLICATIONS
• Ultrasound and Imaging
• Instrumentation
• Communications Receivers
• Sonar/Radar
• xDSL
• Cable Modems
• DSP Front Ends
KEY SPECIFICATIONS
• Resolution: 12 Bits
• DNL: ±0.4 LSB (typ)
• SNR (f_IN = 10 MHz): 69 dB (typ)
• SFDR (f_IN = 10 MHz): 86 dB (typ)
• Data Latency: 7 Clock Cycles
• Power Consumption
– Operating: 360 mW (typ)
– Power Down Mode: 36 mW (typ)
DESCRIPTION
The ADC12DL065 is a dual, low power monolithic
CMOS analog-to-digital converter capable of
converting analog input signals into 12-bit digital
words at 65 Megasamples per second (MSPS). This
converter uses a differential, pipeline architecture with
digital error correction and an on-chip sample-and-
hold circuit to minimize power consumption while
providing excellent dynamic performance and a 250
MHz Full Power Bandwidth. Operating on a single
+3.3V power supply, the ADC12DL065 achieves 11.0
effective bits at nyquist and consumes just 360 mW
at 65 MSPS, including the reference current. The
Power Down feature reduces power consumption to
36 mW.
The differential inputs provide a full scale differential
input swing equal to 2 times V_REF with the possibility
of a single-ended input. Full use of the differential
input is recommended for optimum performance. The
digital outputs from the two ADC's are available on a
single multiplexed 12-bit bus or on separate buses.
Duty cycle stabilization and output data format are
selectable using a quad state function pin. The output
data can be set for offset binary or two's complement.
To ease interfacing to lower voltage systems, the
digital output driver power pins of the ADC12DL065
can be connected to a separate supply voltage in the
range of 2.4V to the analog supply voltage. This
device is available in the 64-lead TQFP package and
will operate over the industrial temperature range of
−40°C to +85°C. An evaluation board is available to
ease the evaluation process.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated