ADC122S625_15 Datasheet, PDF (1/28 Pages) Texas Instruments – Dual 12-Bit, 50 kSPS to 200 kSPS, Simultaneous Sampling A/D Converter

ADC122S625
www.ti.com
SNAS451A – FEBRUARY 2008 – REVISED MARCH 2013
ADC122S625 Dual 12-Bit, 50 kSPS to 200 kSPS, Simultaneous Sampling A/D Converter
Check for Samples: ADC122S625
FEATURES
1
•23 True Simultaneous Sampling Differential
Inputs
• Specified Performance from 50 kSPS to 200
kSPS
• External Reference
• Wide Input Common-Mode Voltage Range
• Single High-Speed Serial Data Output
• Operating Temperature Range of −40°C to
+105°C
• SPI™/ QSPI™/MICROWIRE/DSP Compatible
Serial Interface
APPLICATIONS
• Motor Control
• Power Meters/Monitors
• Multi-Axis Positioning Systems
• Instrumentation and Control Systems
• Data Acquisition Systems
• Medical Instruments
• Direct Sensor Interface
KEY SPECIFICATIONS
• Conversion Rate: 50 kSPS to 200 kSPS
• INL: ±1 LSB (max)
• DNL: ±0.95 LSB (max)
• SNR: 71 dBc (min)
• THD: -72 dBc (min)
• ENOB: 11.25 bits (min)
• Power Consumption at 200 kSPS
– Converting, V_A = 5V, V_REF = 2.5V: 8.6 mW
(typ)
– Power-Down, V_A = 5V, V_REF = 2.5V: 2.6 µW
(typ)
DESCRIPTION
The ADC122S625 is a dual 12-bit, 50 kSPS to 200
kSPS simultaneous sampling Analog-to-Digital (A/D)
converter. The analog inputs on both channels are
sampled simultaneously to preserve their relative
phase information to each other. The converter is
based on a successive-approximation register
architecture where the differential nature of the
analog inputs is maintained from the internal track-
and-hold circuits throughout the A/D converter to
provide excellent common-mode signal rejection. The
ADC122S625 features an external reference that can
be varied from 1.0V to V_A.
The ADC122S625's serial data output is binary 2's
complement and is compatible with several
standards, such as SPI™, QSPI™, MICROWIRE™,
and many common DSP serial interfaces. The serial
clock (SCLK) and chip select bar (CS) are shared by
both channels.
Operating from a single 5V analog supply and a
reference voltage of 2.5V, the total power
consumption while operating at 200 kSPS is typically
8.6 mW. With the ADC122S625 operating in power-
down mode, the power consumption reduces to 2.6
µW. The differential input, low power consumption,
and small size make the ADC122S625 ideal for direct
connection to sensors in motor control applications.
Operation is specified over the industrial temperature
range of −40°C to +105°C and clock rates of 1.6 MHz
to 6.4 MHz. The ADC122S625 is available in a 10-
lead VSSOP package.
Connection Diagram
V_REF
CHA+
CHA -
CHB -
CHB+
1
10
2
9
3 ^ADC122S625 8
4
7
5
6
CS
SCLK
D_OUT
V_A
GND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SPI, QSPI are trademarks of Motorola, Incorporated.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated