ADC08L060_14 Datasheet, PDF (1/29 Pages) Texas Instruments – 8-Bit, 10 MSPS to 60 MSPS, 0.65 mW/MSPS A/D Converter with Internal Sample-and-Hold

ADC08L060
www.ti.com
SNAS167G – MAY 2002 – REVISED MARCH 2013
ADC08L060 8-Bit, 10 MSPS to 60 MSPS, 0.65 mW/MSPS A/D Converter with Internal
Sample-and-Hold
Check for Samples: ADC08L060
FEATURES
1
•2 Single-ended input
• Internal sample-and-hold function
• Low voltage (single +3V) operation
• Small package
• Power-down feature
KEY SPECIFICATIONS
• Resolution 8 bits
• Conversion rate 60 MSPS
• DNL ±0.25 LSB (typ)
• INL +0.5/−0.2 LSB (typ)
• SNR (10.1 MHz) 48 dB (typ)
• ENOB (10.1 MHz) 7.6 bits (typ)
• THD (10.1 MHz) −57 dB (typ)
• Latency 5 Clock Cycles
• No missing codes Ensured
• Power Consumption
– Operating 0.65 mW/MSPS (typ)
– Power Down Mode 1.0 mW (typ)
DESCRIPTION
The ADC08L060 is a low-power, 8-bit, monolithic
analog-to-digital converter with an on-chip track-and-
hold circuit. Optimized for low cost, low power, small
size and ease of use, this product operates at
conversion rates of 10 MSPS to 60 MSPS while
consuming just 0.65 mW per MHz of clock frequency,
or 39 mW at 60 MSPS. Raising the PD pin puts the
ADC08L060 into a Power Down mode where it
consumes about 1 mW.
The unique architecture achieves 7.6 Effective Bits.
The ADC08L060 is resistant to latch-up and the
outputs are short-circuit proof. The top and bottom of
the ADC08L060s reference ladder are available for
connections, enabling a wide range of input
possibilities. The digital outputs are TTL/CMOS
compatible with a separate output power supply pin
to support interfacing with 1.8V to 3V logic. The
output coding is straight binary and the digital inputs
(CLK and PD) are TTL/CMOS compatible.
The ADC08L060 is offered in a 24-lead plastic
package (TSSOP) and is specified over the industrial
temperature range of −40°C to +85°C.
APPLICATIONS
• Digital Imaging
• Set-top boxes
• Portable Instrumentation
• Communication Systems
• X-ray imaging
• Viterbi decoders
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2013, Texas Instruments Incorporated