English
Language : 

TCA9555 Datasheet, PDF (8/32 Pages) Texas Instruments – LOW VOLTAGE 16-BIT I2C AND SMBus I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION REGISTERS
TCA9555
SCPS200A – JULY 2009 – REVISED JULY 2009 .............................................................................................................................................................. www.ti.com
Device Address
Figure 4 shows the address byte of the TCA9555.
R/W
Slave Address
0 1 0 0 A2 A1 A0
Fixed Programmable
Figure 4. TCA9555 Address
Address Reference
INPUTS
A2
A1
A0
L
L
L
L
L
H
L
H
L
L
H
H
H
L
L
H
L
H
H
H
L
H
H
H
I2C BUS SLAVE ADDRESS
32 (decimal), 20 (hexadecimal)
33 (decimal), 21 (hexadecimal)
34 (decimal), 22 (hexadecimal)
35 (decimal), 23 (hexadecimal)
36 (decimal), 24 (hexadecimal)
37 (decimal), 25 (hexadecimal)
38 (decimal), 26 (hexadecimal)
39 (decimal), 27 (hexadecimal)
The last bit of the slave address defines the operation (read or write) to be performed. A high (1) selects a read
operation, while a low (0) selects a write operation.
Control Register and Command Byte
Following the successful acknowledgment of the address byte, the bus master sends a command byte that is
stored in the control register in the TCA9555. Three bits of this data byte state the operation (read or write) and
the internal register (input, output, polarity inversion, or configuration) that will be affected. This register can be
written or read through the I2C bus. The command byte is sent only during a write transmission.
Once a command byte has been sent, the register that was addressed continues to be accessed by reads until a
new command byte has been sent.
0 0 0 0 0 B2 B1 B0
Figure 5. Control Register Bits
CONTROL REGISTER BITS
B2
B1
B0
0
0
0
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
Command Byte
COMMAND
BYTE (HEX)
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
REGISTER
Input Port 0
Input Port 1
Output Port 0
Output Port 1
Polarity Inversion Port 0
Polarity Inversion Port 1
Configuration Port 0
Configuration Port 1
PROTOCOL
Read byte
Read byte
Read/write byte
Read/write byte
Read/write byte
Read/write byte
Read/write byte
Read/write byte
POWER-UP
DEFAULT
xxxx xxxx
xxxx xxxx
1111 1111
1111 1111
0000 0000
0000 0000
1111 1111
1111 1111
8
Submit Documentation Feedback
Product Folder Link(s): TCA9555
Copyright © 2009, Texas Instruments Incorporated