TLC072A Datasheet, PDF (7/51 Pages) Texas Instruments – FAMILY OF WIDE BAND WIDTH HIGH OUTPUT DRIVE SINGLE SUPPLY OPERATIONAL AMPLIFIERS

TLC070, TLC071, TLC072, TLC073, TLC074, TLC075, TLC07xA
FAMILY OF WIDEĆBANDWIDTH HIGHĆOUTPUTĆDRIVE SINGLE SUPPLY
OPERATIONAL AMPLIFIERS
SLOS219D − JUNE 1999 − REVISED FEBRUARY 2004
operating characteristics at specified free-air temperature, V_DD = 5 V (unless otherwise noted)
PARAMETER
SR+
Positive slew rate at unity gain
TEST CONDITIONS
VO(PP) = 0.8 V,
RL = 10 kΩ
CL = 50 pF,
TA†
MIN
25°C
10
Full range 9.5
TYP MAX UNIT
16
V/µs
SR−
Negative slew rate at unity gain
VO(PP) = 0.8 V,
RL = 10 kΩ
CL = 50 pF,
25°C
12.5
19
Full range
10
V/µs
f = 100 Hz
Vn
Equivalent input noise voltage
f = 1 kHz
25°C
25°C
12
nV/√Hz
7
In
Equivalent input noise current
f = 1 kHz
25°C
0.6
fA /√Hz
THD + N
t(on)
t(off)
Total harmonic distortion plus noise
Amplifier turnon time‡
Amplifier turnoff time‡
Gain-bandwidth product
VO(PP) = 3 V,
RL = 10 kΩ and 250 Ω,
f = 1 kHz
AV = 1
AV = 10
AV = 100
RL = 10 kΩ
f = 10 kHz,
RL = 10 kΩ
25°C
25°C
25°C
25°C
0.002%
0.012%
0.085%
0.15
1.3
10
µs
µs
MHz
ts
Settling time
φ_m
Phase margin
V(STEP)PP = 1 V,
AV = −1,
CL = 10 pF,
RL = 10 kΩ
V(STEP)PP = 1 V,
AV = −1,
CL = 47 pF,
RL = 10 kΩ
RL = 10 kΩ,
RL = 10 kΩ,
0.1%
0.01%
0.1%
0.01%
CL = 50 pF
CL = 0 pF
25°C
25°C
0.18
0.39
µs
0.18
0.39
32°
40°
Gain margin
RL = 10 kΩ,
RL = 10 kΩ,
CL = 50 pF
CL = 0 pF
25°C
2.2
dB
3.3
† _{Full range is 0°C to 70°C for C suffix and − 40°C to 125°C for I suffix. If not specified, full range is − 40°C to 125°C.}
‡ _{Disable time and enable time are defined as the interval between application of the logic signal to SHDN and the point at which the supply current}
has reached half its final value.
• ^WWW.TI.COM
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
7