CC2400_07 Datasheet, PDF (6/83 Pages) Texas Instruments – 2.4 GHz Low-Power RF Transceiver

CC2400
3 Absolute Maximum Ratings
Parameter
Supply voltage, chip core,
AVDD/DVDD1.8=VDD
Supply voltage (DVDD3.3=VDDIO), digital I/O
Voltage on any pin, core
Voltage on any pin, digital I/O (pin no. 27-35)
Input RF level
Storage temperature range
Reflow solder temperature
Min.
−0.3
−0.3
−0.3
−0.3
−50
Max.
2.0
3.6
VDD+0.3,
max 2.0
VDDIO+0.3,
max 3.6
10
150
260
Units
V
V
V
V
dBm
°C
°C
Condition
T = 10 s
NOTE:
The supply voltage to the chip core (AVDD/DVDD1.8) should not be switched off when the digital IO (DVDD3.3)
supply voltage is still applied to the chip. If this is done, a large current will flow inside the CC2400 and the chip may
be damaged as a result.
If the core supply needs to be switched off to lower the power consumption, please see page 17 for a suggested
solution.
The absolute maximum ratings given
above should under no circumstances be
violated. Stress exceeding one or more of
Caution! ESD sensitive device.
Precaution should be used when handling
the device in order to prevent permanent
damage.
the limiting values may cause permanent
damage to the device.
4 Operating Conditions
Parameter
Supply voltage, chip core,
AVDD/DVDD1.8
Supply voltage (DVDD3.3), digital
I/O, VDDIO
Recommended supply voltage, chip
core, AVDD/DVDD1.8
Recommended supply voltage
(DVDD3.3), digital I/O
Operating ambient temperature
range
Min.
1.6
1.6
−40
Typ.
1.8V
1.8V/
3.3V
Max.
2.0
3.6
85
Unit
V
Condition
V The digital I/O voltage (DVDD3.3
pin) must match the interfacing
circuit.
°C
SWRS042A
Page 6 of 83