English
Language : 

TS3DV520E_10 Datasheet, PDF (5/19 Pages) Texas Instruments – 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS
◁
TS3DV520E
www.ti.com............................................................................................................................................................... SCDS240B – JUNE 2007 – REVISED MAY 2009
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
VCC Supply voltage range
VIN Control input voltage range(2)(3)
VI/O Switch I/O voltage range(2)(3)(4)
IIK Control input clamp current
II/OK I/O port clamp current
II/O ON-state switch current(5)
Continuous current through VCC or GND
θJA Package thermal impedance(6)
Tstg Storage temperature range
VIN < 0 or VIN > VCC
VI/O < 0 or VI/O > VCC
RHU package
RUA package
MIN
MAX UNIT
–0.5
4.6 V
–0.5 VCC + 0.5
V
–0.5 VCC + 0.5
V
–50
50 mA
–50
50 mA
±128 mA
±100 mA
31.8
°C/W
51.2
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) VI and VO are used to denote specific conditions for VI/O.
(5) II and IO are used to denote specific conditions for II/O.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS(1)
VCC Supply voltage
VIH High-level control input voltage (SEL)
VIL
Low-level control input voltage (SEL)
VI/O Input/output voltage
TA
Operating free-air temperature
MIN MAX UNIT
3
3.6 V
2
VCC
V
0
0.8 V
0
VCC
V
–40
85 °C
(1) All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Copyright © 2007–2009, Texas Instruments Incorporated
Product Folder Link(s): TS3DV520E
Submit Documentation Feedback
5
 ▷