TS3DV520E_10 Datasheet, PDF (1/19 Pages) Texas Instruments – 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS

TS3DV520E
www.ti.com............................................................................................................................................................... SCDS240B – JUNE 2007 – REVISED MAY 2009
5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH
FOR DVI/HDMI APPLICATIONS
FEATURES
1
• Compatible With HDMI v1.2a (Type A) DVI 1.0
High-Speed Digital Interface
– Wide Bandwidth to support throughput of
over 1.65 Gbps (Data rate 1.9 Gbps Typ)
– Serial Data Stream at 10× Pixel Clock Rate
– Supports All Video Formats up to 1080p
and SXGA (1280 × 1024 at 75 Hz)
– Total Raw Capacity 4.95 Gbps (Single Link)
– HDCP Compatible
• Compatible with SXGA Video Display formats
up to 1080P (1280 × 1024 at 75Hz)
• Low Crosstalk (X_TALK = –37 dB Typ)
• Low Bit-to-Bit Skew (t_sk(o) = 0.1 ns Max)
• Low and Flat ON-State Resistance
(r_on = 4 Ω Typ, r_on(flat) = 0.5 Ω Typ)
• Low Input/Output Capacitance
(C_ON = 8 pF Typ)
• Rail-to-Rail Switching on Data I/O Ports
(0 to 3.6 V)
• V_CC Operating Range From 3 V to 3.6 V
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Performance Tested
– 14-kV Human-Body Model Per JESD 22
(A114-B, Class II)
– 7.5-kV Contact Discharge Per IEC 61000-4-2
APPLICATIONS
• DVI/HDMI Signal Switching
• Differential DVI, HDMI Signal Multiplexing for
Audio/Video Receivers and High-Definition
Televisions (HDTVs)
DESCRIPTION/ORDERING INFORMATION
The TS3DV520E is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL)
input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels
for digital video signal switching.
This device provides low and flat ON-state resistance (r_on) and excellent ON-state resistance match. Low
input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable
for various digital video applications, such as DVI and HDMI.
Voltage on the SEL pin should be less or equal to V_CC, even in the power-down mode (V_CC = 0 V).
T_A
–40°C to 85°C
ORDERING INFORMATION
PACKAGE ^{(1) (2)}
ORDERABLE PART NUMBER
TQFN – RHU
Reel of 2000
TS3DV520ERHURG4
QFN – RUA
Reel of 2000
TS3DV520ERUAR
TOP-SIDE MARKING
SD520E
SD520E
(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2009, Texas Instruments Incorporated