THS6072 Datasheet, PDF (5/24 Pages) Texas Instruments – LOW-POWER ADSL DIFFERENTIAL RECEIVER

THS6072
LOW-POWER ADSL DIFFERENTIAL RECEIVER
SLOS290A – FEBRUARY 2000 – REVISED APRIL 2000
electrical characteristics at T_A = 25°C, V_CC = ±15 V, R_L = 150 Ω (unless otherwise noted) (continued)
input characteristics
PARAMETER
VICR Common-mode input voltage range
CMRR Common mode rejection ratio
RI
Input resistance
CI
Input capacitance
TEST CONDITIONS
VCC = ± 15 V
VCC = ± 5 V
VCC = ± 15 V,
VCC = ± 5 V,
VICR = ± 12 V, TA = full range
VICR = ± 2 V, TA = full range
MIN
± 13.8
± 3.8
78
84
TYP
±14.1
± 3.9
93
90
1
1.5
MAX
UNIT
V
dB
dB
MΩ
pF
output characteristics
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
VO
Output voltage swing
IO
Output current†
ISC
Short-circuit current†
VCC = ± 15 V
VCC = ± 5 V
VCC = ± 15 V
VCC = ± 5 V
VCC = ± 15 V
VCC = ± 5 V
VCC = ± 15 V
RL = 250 Ω
±12 ±13.6
V
RL = 150 Ω
±3.4 ± 3.8
±13 ±13.8
RL = 1 kΩ
±3.5 ± 3.9
V
65
85
RL = 20 Ω
50
70
mA
100
mA
RO
Output resistance
Open loop
13
Ω
† _{Observe power dissipation ratings to keep the junction temperature below the absolute maximum rating when the output is heavily loaded or}
shorted. See the absolute maximum ratings section of this data sheet for more information.
power supply
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
VCC Supply voltage operating range
Dual supply
Single supply
±4.5
±16.5
V
9
33
ICC Supply current (per amplifier)
VCC = ± 15 V
VCC = ± 5 V
PSRR Power supply rejection ratio
VCC = ± 5 V or ± 15 V
‡ _{Full range = 0°C to 70°C for C suffix and – 40°C to 85°C for I suffix}
§ _{Slew rate is measured from an output level range of 25% to 75%.}
¶ _{Full power bandwidth = slew rate/2π VO(Peak).}
TA = 25°C
TA = full range
TA = 25°C
TA = full range
TA = full range
3.4 4.2
5
mA
2.9 3.7
4.5
79
90
dB
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
5