CC2533_11 Datasheet, PDF (5/34 Pages) Texas Instruments – An Optimized System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 Remote Control Applications

CC2533
www.ti.com
SWRS087 – JUNE 2010
ELECTRICAL CHARACTERISTICS (continued)
Measured on Texas Instruments CC2533 EM reference design with T_A = 25°C and VDD = 3 V, unless otherwise noted.
Boldface limits apply over the entire operating range, T_A = –40°C to 125°C, VDD = 2 V to 3.6 V, and f_c = 2394 MHz to
2507 MHz.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
Peripheral Current Consumption (Adds to core current I_core for each peripheral unit activated)
Timer 1
Timer running, 32-MHz XOSC used
90
mA
Timer 2
Timer running, 32-MHz XOSC used
90
mA
Timer 3
Timer running, 32-MHz XOSC used
60
mA
I_peri
Timer 4
Sleep timer
Timer running, 32-MHz XOSC used
Including 32.753-kHz RCOSC
70
mA
0.6
mA
Battery monitor
When comparing
93
mA
Flash
Erase
Burst-write peak current
0.2
mA
6
mA
GENERAL CHARACTERISTICS
Measured on Texas Instruments CC2533 EM reference design with T_A = 25°C and VDD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
WAKE-UP AND TIMING
Power mode 1 → active
Digital regulator on, 16-MHz RCOSC and 32-MHz crystal
oscillator off. Start-up of 16-MHz RCOSC
4
ms
Power mode 2 or 3 → active
Digital regulator off, 16-MHz RCOSC and 32-MHz crystal
oscillator off. Start-up of regulator and 16-MHz RCOSC
0.1
ms
Active → TX or RX
Initially running on 16-MHz RCOSC, with 32-MHz XOSC
OFF
With 32-MHz XOSC initially on
0.6
ms
192 ms
RX/TX and TX/RX turnaround
192 ms
RADIO PART
RF frequency range
Programmable in 1-MHz steps, 5 MHz between channels
for compliance with [1]
2394
2507 MHz
Radio baud rate
As defined by [1]
250
kbps
Radio chip rate
As defined by [1]
2
MChip/s
Flash page size
1
KB
Flash erase cycles
20 K Cycles
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CC2533
Submit Documentation Feedback
5