CC2533_11 Datasheet, PDF (4/34 Pages) Texas Instruments – An Optimized System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 Remote Control Applications

CC2533
SWRS087 – JUNE 2010
www.ti.com
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply voltage
Voltage on any digital pin
Input RF level
Storage temperature range
ESD ⁽²⁾
All supply pins must have the same voltage
All pads, according to human-body model, JEDEC STD 22, method
A114
According to charged-device model, JEDEC STD 22, method C101
All pads excluding RF pads, according to machine model, JEDEC STD
22, method A115
MIN
MAX UNIT
–0.3
3.9 V
–0.3 VDD + 0.3,
≤ 3.9
V
10 dBm
–40
125 °C
2 kV
500 V
200 V
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) CAUTION: ESD-sensitive device. Precautions should be used when handling the device in order to prevent permanent damage.
RECOMMENDED OPERATING CONDITIONS
Operating ambient temperature range, T_A
Operating supply voltage
MIN MAX UNIT
–40
125 °C
2
3.6 V
ELECTRICAL CHARACTERISTICS
Measured on Texas Instruments CC2533 EM reference design with T_A = 25°C and VDD = 3 V, unless otherwise noted.
Boldface limits apply over the entire operating range, T_A = –40°C to 125°C, VDD = 2 V to 3.6 V, and f_c = 2394 MHz to
2507 MHz.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
Digital regulator on. 16-MHz RCOSC running. No radio,
crystals, or peripherals active.
Medium CPU activity: normal flash access⁽¹⁾, no RAM access
3.6
mA
32-MHz XOSC running. No radio or peripherals active.
Medium CPU activity: normal flash access⁽¹⁾, no RAM access
6.6 7.7 mA
32-MHz XOSC running, radio in RX mode, –50-dBm input
power, no peripherals active, CPU idle
21.6
mA
32-MHz XOSC running, radio in RX mode at –100-dBm input
power (waiting for signal), no peripherals active, CPU idle
25.1 29.8 mA
32-MHz XOSC running, radio in TX mode, 0-dBm output
power, no peripherals active, CPU idle
28.5
mA
I_core Core current consumption
32-MHz XOSC running, radio in TX mode, 4.5-dBm output
power, no peripherals active, CPU idle
32.3 40.6 mA
32-MHz XOSC running, radio in boost mode TX, 7-dBm output
power, no peripherals active, CPU idle
38.8
mA
Power mode 1. Digital regulator on; 16-MHz RCOSC and
32-MHz crystal oscillator off; 32.768-kHz XOSC, POR, BOD,
and sleep timer active; RAM and register retention
0.2 0.3 mA
Power mode 2. Digital regulator off; 16-MHz RCOSC and
32-MHz crystal oscillator off; 32.768-kHz XOSC, POR, and
sleep timer active; RAM and register retention
1 1.5 mA
Power mode 3. Digital regulator off; no clocks; POR active;
RAM and register retention
0.4 0.7 mA
During reset with supply voltage of 1.2 V
54
mA
(1) Normal flash access means that the code used exceeds the cache storage, so cache misses happen frequently.
4
Submit Documentation Feedback
Product Folder Link(s): CC2533
Copyright © 2010, Texas Instruments Incorporated