TSB12C01A Datasheet, PDF (42/59 Pages) Texas Instruments – High-Speed Serial-Bus Link-Layer Controller

5.2 Recommended Operating Conditions
MIN NOM MAX UNIT
Supply voltage, VCC
Input voltage, VI
High-level input voltage, VIH
Low-level input voltage, VIL
Clock frequency
BCLK
SCLK
4.75
5
0
2
0
25
49.152
5.25
VCC
VCC
0.8
V
V
V
V
MHz
Virtual junction temperature, TJ†
TSB12C01A
TSB12C01AI
TSB12C01AM
115
125 °C
150
TSB12C01A
0
70
Operating free-air temperature, TA
TSB12C01AI
– 40
85 °C
TSB12C01AM
– 55
125
† _{Actual junction temperature is a function of ambient temperature, package selection, power dissipation, and air flow.}
Customer is responsible for maintaining the junction temperature within the recommended operating conditions.
Operating device at junction temperatures higher than what is recommended will cause device to operate outside the
characterization models established during device simulation and may affect the reliability performance.
5.3 Electrical Characteristics Over Recommended Ranges of Supply Voltage
and Operating Free-Air Temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP† MAX UNIT
VOH
VOL
VIT ₊
VIT _–
IIL
IIH
High-level output voltage
Low-level output voltage
Positive-going input threshold voltage
Negative-going input threshold voltage
Low-level input current
High-level input current
IOZ High-impedance-state output current
IOH = – 4 mA
IOL = 4 mA
VCC – 0.8
0.8
VI = GND
VI = VCC
VO = VCC or GND,
See Note 4
V
0.5 V
2V
V
– 1 µA
1 µA
± 10 µA
ICC Supply current
No load on outputs,
SCLK = 49.152 MHz
BCLK = 25 MHz
150
mA
PZ package
input terminals
5
Ci Input capacitance
WN package
input terminals
PZ package
bidirectional
terminals
WN package
bidirectional
terminals
VCC = 5 V,
TA = 25°C
6
pF
13
7
Co Output capacitance
PZ package
WN package
† _{All typical values are at VCC = 5 V and TA = 25°C.}
NOTE 4: All outputs are in the high-impedance state.
8
pF
7
5–2